package com.sforce.ws.parser;
/* -*- c-basic-offset: 4; indent-tabs-mode: nil; -*- //------100-columns-wide------>|*/
// for license please see accompanying LICENSE.txt file (available also at http://www.xmlpull.org/)
import java.io.InputStream;
import java.io.IOException;
import java.io.Reader;
/**
* XML Pull Parser is an interface that defines parsing functionlity provided
* in <a href="http://www.xmlpull.org/">XMLPULL V1 API</a> (visit this website to
* learn more about API and its implementations).
* <p/>
* <p>There are following different
* kinds of parser depending on which features are set:<ul>
* <li><b>non-validating</b> parser as defined in XML 1.0 spec when
* FEATURE_PROCESS_DOCDECL is set to true
* <li><b>validating parser</b> as defined in XML 1.0 spec when
* FEATURE_VALIDATION is true (and that implies that FEATURE_PROCESS_DOCDECL is true)
* <li>when FEATURE_PROCESS_DOCDECL is false (this is default and
* if different value is required necessary must be changed before parsing is started)
* then parser behaves like XML 1.0 compliant non-validating parser under condition that
* <em>no DOCDECL is present</em> in XML documents
* (internal entites can still be defined with defineEntityReplacementText()).
* This mode of operation is intened <b>for operation in constrained environments</b> such as J2ME.
* </ul>
* <p/>
* <p/>
* <p>There are two key methods: next() and nextToken(). While next() provides
* access to high level parsing events, nextToken() allows access to lower
* level tokens.
* <p/>
* <p>The current event state of the parser
* can be determined by calling the
* <a href="#getEventType()">getEventType()</a> method.
* Initially, the parser is in the <a href="#START_DOCUMENT">START_DOCUMENT</a>
* state.
* <p/>
* <p>The method <a href="#next()">next()</a> advances the parser to the
* next event. The int value returned from next determines the current parser
* state and is identical to the value returned from following calls to
* getEventType ().
* <p/>
* <p>Th following event types are seen by next()<dl>
* <dt><a href="#START_TAG">START_TAG</a><dd> An XML start tag was read.
* <dt><a href="#TEXT">TEXT</a><dd> Text content was read;
* the text content can be retreived using the getText() method.
* (when in validating mode next() will not report ignorable whitespaces, use nextToken() instead)
* <dt><a href="#END_TAG">END_TAG</a><dd> An end tag was read
* <dt><a href="#END_DOCUMENT">END_DOCUMENT</a><dd> No more events are available
* </dl>
* <p/>
* <p>after first next() or nextToken() (or any other next*() method)
* is called user application can obtain
* XML version, standalone and encoding from XML declaration
* in following ways:<ul>
* <li><b>version</b>:
* getProperty("<a href="http://xmlpull.org/v1/doc/properties.html#xmldecl-version">http://xmlpull.org/v1/doc/properties.html#xmldecl-version</a>")
* returns String ("1.0") or null if XMLDecl was not read or if property is not supported
* <li><b>standalone</b>:
* getProperty("<a href="http://xmlpull.org/v1/doc/features.html#xmldecl-standalone">http://xmlpull.org/v1/doc/features.html#xmldecl-standalone</a>")
* returns Boolean: null if there was no standalone declaration
* or if property is not supported
* otherwise returns Boolean(true) if standalon="yes" and Boolean(false) when standalone="no"
* <li><b>encoding</b>: obtained from getInputEncoding()
* null if stream had unknown encoding (not set in setInputStream)
* and it was not declared in XMLDecl
* </ul>
* <p/>
* A minimal example for using this API may look as follows:
* <pre>
* import java.io.IOException;
* import java.io.StringReader;
* <p/>
* import org.xmlpull.v1.XmlPullParser;
* import org.xmlpull.v1.<a href="XmlPullParserException.html">XmlPullParserException.html</a>;
* import org.xmlpull.v1.<a href="XmlPullParserFactory.html">XmlPullParserFactory</a>;
* <p/>
* public class SimpleXmlPullApp
* {
* <p/>
* public static void main (String args[])
* throws XmlPullParserException, IOException
* {
* XmlPullParserFactory factory = XmlPullParserFactory.newInstance();
* factory.setNamespaceAware(true);
* XmlPullParser xpp = factory.newPullParser();
* <p/>
* xpp.<a href="#setInput">setInput</a>( new StringReader ( "<foo>Hello World!</foo>" ) );
* int eventType = xpp.getEventType();
* while (eventType != XmlPullParser.END_DOCUMENT) {
* if(eventType == XmlPullParser.START_DOCUMENT) {
* System.out.println("Start document");
* } else if(eventType == XmlPullParser.END_DOCUMENT) {
* System.out.println("End document");
* } else if(eventType == XmlPullParser.START_TAG) {
* System.out.println("Start tag "+xpp.<a href="#getName()">getName()</a>);
* } else if(eventType == XmlPullParser.END_TAG) {
* System.out.println("End tag "+xpp.getName());
* } else if(eventType == XmlPullParser.TEXT) {
* System.out.println("Text "+xpp.<a href="#getText()">getText()</a>);
* }
* eventType = xpp.next();
* }
* }
* }
* </pre>
* <p/>
* <p>The above example will generate the following output:
* <pre>
* Start document
* Start tag foo
* Text Hello World!
* End tag foo
* </pre>
* <p/>
* <p>For more details on API usage, please refer to the
* quick Introduction available at <a href="http://www.xmlpull.org">http://www.xmlpull.org</a>
*
* @author <a href="http://www-ai.cs.uni-dortmund.de/PERSONAL/haustein.html">Stefan Haustein</a>
* @author <a href="http://www.extreme.indiana.edu/~aslom/">Aleksander Slominski</a>
* @see XmlPullParserFactory
* @see #defineEntityReplacementText
* @see #getName
* @see #getNamespace
* @see #getText
* @see #next
* @see #nextToken
* @see #setInput
* @see #FEATURE_PROCESS_DOCDECL
* @see #FEATURE_VALIDATION
* @see #START_DOCUMENT
* @see #START_TAG
* @see #TEXT
* @see #END_TAG
* @see #END_DOCUMENT
*/
public interface XmlPullParser {
/**
* This constant represents the default namespace (empty string "")
*/
String NO_NAMESPACE = "";
// ----------------------------------------------------------------------------
// EVENT TYPES as reported by next()
/**
* Signalize that parser is at the very beginning of the document
* and nothing was read yet.
* This event type can only be observed by calling getEvent()
* before the first call to next(), nextToken, or nextTag()</a>).
*
* @see #next
* @see #nextToken
*/
int START_DOCUMENT = 0;
/**
* Logical end of the xml document. Returned from getEventType, next()
* and nextToken()
* when the end of the input document has been reached.
* <p><strong>NOTE:</strong> calling again
* <a href="#next()">next()</a> or <a href="#nextToken()">nextToken()</a>
* will result in exception being thrown.
*
* @see #next
* @see #nextToken
*/
int END_DOCUMENT = 1;
/**
* Returned from getEventType(),
* <a href="#next()">next()</a>, <a href="#nextToken()">nextToken()</a> when
* a start tag was read.
* The name of start tag is available from getName(), its namespace and prefix are
* available from getNamespace() and getPrefix()
* if <a href='#FEATURE_PROCESS_NAMESPACES'>namespaces are enabled</a>.
* See getAttribute* methods to retrieve element attributes.
* See getNamespace* methods to retrieve newly declared namespaces.
*
* @see #next
* @see #nextToken
* @see #getName
* @see #getPrefix
* @see #getNamespace
* @see #getAttributeCount
* @see #getDepth
* @see #getNamespaceCount
* @see #getNamespace
* @see #FEATURE_PROCESS_NAMESPACES
*/
int START_TAG = 2;
/**
* Returned from getEventType(), <a href="#next()">next()</a>, or
* <a href="#nextToken()">nextToken()</a> when an end tag was read.
* The name of start tag is available from getName(), its
* namespace and prefix are
* available from getNamespace() and getPrefix().
*
* @see #next
* @see #nextToken
* @see #getName
* @see #getPrefix
* @see #getNamespace
* @see #FEATURE_PROCESS_NAMESPACES
*/
int END_TAG = 3;
/**
* Character data was read and will is available by calling getText().
* <p><strong>Please note:</strong> <a href="#next()">next()</a> will
* accumulate multiple
* events into one TEXT event, skipping IGNORABLE_WHITESPACE,
* PROCESSING_INSTRUCTION and COMMENT events,
* In contrast, <a href="#nextToken()">nextToken()</a> will stop reading
* text when any other event is observed.
* Also, when the state was reached by calling next(), the text value will
* be normalized, whereas getText() will
* return unnormalized content in the case of nextToken(). This allows
* an exact roundtrip without chnanging line ends when examining low
* level events, whereas for high level applications the text is
* normalized apropriately.
*
* @see #next
* @see #nextToken
* @see #getText
*/
int TEXT = 4;
// ----------------------------------------------------------------------------
// additional events exposed by lower level nextToken()
/**
* A CDATA sections was just read;
* this token is available only from calls to <a href="#nextToken()">nextToken()</a>.
* A call to next() will accumulate various text events into a single event
* of type TEXT. The text contained in the CDATA section is available
* by callling getText().
*
* @see #nextToken
* @see #getText
*/
int CDSECT = 5;
/**
* An entity reference was just read;
* this token is available from <a href="#nextToken()">nextToken()</a>
* only. The entity name is available by calling getName(). If available,
* the replacement text can be obtained by calling getTextt(); otherwise,
* the user is responsibile for resolving the entity reference.
* This event type is never returned from next(); next() will
* accumulate the replacement text and other text
* events to a single TEXT event.
*
* @see #nextToken
* @see #getText
*/
int ENTITY_REF = 6;
/**
* Ignorable whitespace was just read.
* This token is available only from <a href="#nextToken()">nextToken()</a>).
* For non-validating
* parsers, this event is only reported by nextToken() when outside
* the root element.
* Validating parsers may be able to detect ignorable whitespace at
* other locations.
* The ignorable whitespace string is available by calling getText()
* <p/>
* <p><strong>NOTE:</strong> this is different from calling the
* isWhitespace() method, since text content
* may be whitespace but not ignorable.
* <p/>
* Ignorable whitespace is skipped by next() automatically; this event
* type is never returned from next().
*
* @see #nextToken
* @see #getText
*/
int IGNORABLE_WHITESPACE = 7;
/**
* An XML processing instruction declaration was just read. This
* event type is available only via <a href="#nextToken()">nextToken()</a>.
* getText() will return text that is inside the processing instruction.
* Calls to next() will skip processing instructions automatically.
*
* @see #nextToken
* @see #getText
*/
int PROCESSING_INSTRUCTION = 8;
/**
* An XML comment was just read. This event type is this token is
* available via <a href="#nextToken()">nextToken()</a> only;
* calls to next() will skip comments automatically.
* The content of the comment can be accessed using the getText()
* method.
*
* @see #nextToken
* @see #getText
*/
int COMMENT = 9;
/**
* An XML document type declaration was just read. This token is
* available from <a href="#nextToken()">nextToken()</a> only.
* The unparsed text inside the doctype is available via
* the getText() method.
*
* @see #nextToken
* @see #getText
*/
int DOCDECL = 10;
/**
* This array can be used to convert the event type integer constants
* such as START_TAG or TEXT to
* to a string. For example, the value of TYPES[START_TAG] is
* the string "START_TAG".
* <p/>
* This array is intended for diagnostic output only. Relying
* on the contents of the array may be dangerous since malicous
* applications may alter the array, although it is final, due
* to limitations of the Java language.
*/
String [] TYPES = {
"START_DOCUMENT",
"END_DOCUMENT",
"START_TAG",
"END_TAG",
"TEXT",
"CDSECT",
"ENTITY_REF",
"IGNORABLE_WHITESPACE",
"PROCESSING_INSTRUCTION",
"COMMENT",
"DOCDECL"
};
// ----------------------------------------------------------------------------
// namespace related features
/**
* This feature determines whether the parser processes
* namespaces. As for all features, the default value is false.
* <p><strong>NOTE:</strong> The value can not be changed during
* parsing an must be set before parsing.
*
* @see #getFeature
* @see #setFeature
*/
String FEATURE_PROCESS_NAMESPACES =
"http://xmlpull.org/v1/doc/features.html#process-namespaces";
/**
* This feature determines whether namespace attributes are
* exposed via the attribute access methods. Like all features,
* the default value is false. This feature cannot be changed
* during parsing.
*
* @see #getFeature
* @see #setFeature
*/
String FEATURE_REPORT_NAMESPACE_ATTRIBUTES =
"http://xmlpull.org/v1/doc/features.html#report-namespace-prefixes";
/**
* This feature determines whether the document declaration
* is processed. If set to false,
* the DOCDECL event type is reported by nextToken()
* and ignored by next().
* <p/>
* If this featue is activated, then the document declaration
* must be processed by the parser.
* <p/>
* <p><strong>Please note:</strong> If the document type declaration
* was ignored, entity references may cause exceptions
* later in the parsing process.
* The default value of this feature is false. It cannot be changed
* during parsing.
*
* @see #getFeature
* @see #setFeature
*/
String FEATURE_PROCESS_DOCDECL =
"http://xmlpull.org/v1/doc/features.html#process-docdecl";
/**
* If this feature is activated, all validation errors as
* defined in the XML 1.0 sepcification are reported.
* This implies that FEATURE_PROCESS_DOCDECL is true and both, the
* internal and external document type declaration will be processed.
* <p><strong>Please Note:</strong> This feature can not be changed
* during parsing. The default value is false.
*
* @see #getFeature
* @see #setFeature
*/
String FEATURE_VALIDATION =
"http://xmlpull.org/v1/doc/features.html#validation";
/**
* Use this call to change the general behaviour of the parser,
* such as namespace processing or doctype declaration handling.
* This method must be called before the first call to next or
* nextToken. Otherwise, an exception is thrown.
* <p>Example: call setFeature(FEATURE_PROCESS_NAMESPACES, true) in order
* to switch on namespace processing. The initial settings correspond
* to the properties requested from the XML Pull Parser factory.
* If none were requested, all feautures are deactivated by default.
*
* @throws XmlPullParserException If the feature is not supported or can not be set
* @throws IllegalArgumentException If string with the feature name is null
*/
void setFeature(String name,
boolean state) throws XmlPullParserException;
/**
* Returns the current value of the given feature.
* <p><strong>Please note:</strong> unknown features are
* <strong>always</strong> returned as false.
*
* @param name The name of feature to be retrieved.
* @return The value of the feature.
* @throws IllegalArgumentException if string the feature name is null
*/
boolean getFeature(String name);
/**
* Set the value of a property.
* <p/>
* The property name is any fully-qualified URI.
*
* @throws XmlPullParserException If the property is not supported or can not be set
* @throws IllegalArgumentException If string with the property name is null
*/
void setProperty(String name,
Object value) throws XmlPullParserException;
/**
* Look up the value of a property.
* <p/>
* The property name is any fully-qualified URI.
* <p><strong>NOTE:</strong> unknown properties are <strong>always</strong>
* returned as null.
*
* @param name The name of property to be retrieved.
* @return The value of named property.
*/
Object getProperty(String name);
/**
* Set the input source for parser to the given reader and
* resets the parser. The event type is set to the initial value
* START_DOCUMENT.
* Setting the reader to null will just stop parsing and
* reset parser state,
* allowing the parser to free internal resources
* such as parsing buffers.
*/
void setInput(Reader in) throws XmlPullParserException;
/**
* Sets the input stream the parser is going to process.
* This call resets the parser state and sets the event type
* to the initial value START_DOCUMENT.
* <p/>
* <p><strong>NOTE:</strong> If an input encoding string is passed,
* it MUST be used. Otherwise,
* if inputEncoding is null, the parser SHOULD try to determine
* input encoding following XML 1.0 specification (see below).
* If encoding detection is supported then following feature
* <a href="http://xmlpull.org/v1/doc/features.html#detect-encoding">http://xmlpull.org/v1/doc/features.html#detect-encoding</a>
* MUST be true amd otherwise it must be false
*
* @param inputStream contains a raw byte input stream of possibly
* unknown encoding (when inputEncoding is null).
* @param inputEncoding if not null it MUST be used as encoding for inputStream
*/
void setInput(InputStream inputStream, String inputEncoding)
throws XmlPullParserException;
/**
* Returns the input encoding if known, null otherwise.
* If setInput(InputStream, inputEncoding) was called with an inputEncoding
* value other than null, this value must be returned
* from this method. Otherwise, if inputEncoding is null and
* the parser suppports the encoding detection feature
* (http://xmlpull.org/v1/doc/features.html#detect-encoding),
* it must return the detected encoding.
* If setInput(Reader) was called, null is returned.
* After first call to next if XML declaration was present this method
* will return encoding declared.
*/
String getInputEncoding();
/**
* Set new value for entity replacement text as defined in
* <a href="http://www.w3.org/TR/REC-xml#intern-replacement">XML 1.0 Section 4.5
* Construction of Internal Entity Replacement Text</a>.
* If FEATURE_PROCESS_DOCDECL or FEATURE_VALIDATION are set, calling this
* function will result in an exception -- when processing of DOCDECL is
* enabled, there is no need to the entity replacement text manually.
* <p/>
* <p>The motivation for this function is to allow very small
* implementations of XMLPULL that will work in J2ME environments.
* Though these implementations may not be able to process the document type
* declaration, they still can work with known DTDs by using this function.
* <p/>
* <p><b>Please notes:</b> The given value is used literally as replacement text
* and it corresponds to declaring entity in DTD that has all special characters
* escaped: left angle bracket is replaced with &lt;, ampersnad with &amp;
* and so on.
* <p/>
* <p><b>Note:</b> The given value is the literal replacement text and must not
* contain any other entity reference (if it contains any entity reference
* there will be no further replacement).
* <p/>
* <p><b>Note:</b> The list of pre-defined entity names will
* always contain standard XML entities such as
* amp (&amp;), lt (&lt;), gt (&gt;), quot (&quot;), and apos (&apos;).
* Those cannot be redefined by this method!
*
* @see #setInput
* @see #FEATURE_PROCESS_DOCDECL
* @see #FEATURE_VALIDATION
*/
void defineEntityReplacementText(String entityName,
String replacementText) throws XmlPullParserException;
/**
* Returns the numbers of elements in the namespace stack for the given
* depth.
* If namespaces are not enabled, 0 is returned.
* <p/>
* <p><b>NOTE:</b> when parser is on END_TAG then it is allowed to call
* this function with getDepth()+1 argument to retrieve position of namespace
* prefixes and URIs that were declared on corresponding START_TAG.
* <p><b>NOTE:</b> to retrieve lsit of namespaces declared in current element:<pre>
* XmlPullParser pp = ...
* int nsStart = pp.getNamespaceCount(pp.getDepth()-1);
* int nsEnd = pp.getNamespaceCount(pp.getDepth());
* for (int i = nsStart; i < nsEnd; i++) {
* String prefix = pp.getNamespacePrefix(i);
* String ns = pp.getNamespaceUri(i);
* // ...
* }
* </pre>
*
* @see #getNamespacePrefix
* @see #getNamespaceUri
* @see #getNamespace()
* @see #getNamespace(String)
*/
int getNamespaceCount(int depth) throws XmlPullParserException;
/**
* Returns the namespace prefixe for the given position
* in the namespace stack.
* Default namespace declaration (xmlns='...') will have null as prefix.
* If the given index is out of range, an exception is thrown.
* <p><b>Please note:</b> when the parser is on an END_TAG,
* namespace prefixes that were declared
* in the corresponding START_TAG are still accessible
* although they are no longer in scope.
*/
String getNamespacePrefix(int pos) throws XmlPullParserException;
/**
* Returns the namespace URI for the given position in the
* namespace stack
* If the position is out of range, an exception is thrown.
* <p><b>NOTE:</b> when parser is on END_TAG then namespace prefixes that were declared
* in corresponding START_TAG are still accessible even though they are not in scope
*/
String getNamespaceUri(int pos) throws XmlPullParserException;
/**
* Returns the URI corresponding to the given prefix,
* depending on current state of the parser.
* <p/>
* <p>If the prefix was not declared in the current scope,
* null is returned. The default namespace is included
* in the namespace table and is available via
* getNamespace (null).
* <p/>
* <p>This method is a convenience method for
* <p/>
* <pre>
* for (int i = getNamespaceCount(getDepth ())-1; i >= 0; i--) {
* if (getNamespacePrefix(i).equals( prefix )) {
* return getNamespaceUri(i);
* }
* }
* return null;
* </pre>
* <p/>
* <p><strong>Please note:</strong> parser implementations
* may provide more efifcient lookup, e.g. using a Hashtable.
* The 'xml' prefix is bound to "http://www.w3.org/XML/1998/namespace", as
* defined in the
* <a href="http://www.w3.org/TR/REC-xml-names/#ns-using">Namespaces in XML</a>
* specification. Analogous, the 'xmlns' prefix is resolved to
* <a href="http://www.w3.org/2000/xmlns/">http://www.w3.org/2000/xmlns/</a>
*
* @see #getNamespaceCount
* @see #getNamespacePrefix
* @see #getNamespaceUri
*/
String getNamespace(String prefix);
// --------------------------------------------------------------------------
// miscellaneous reporting methods
/**
* Returns the current depth of the element.
* Outside the root element, the depth is 0. The
* depth is incremented by 1 when a start tag is reached.
* The depth is decremented AFTER the end tag
* event was observed.
* <p/>
* <pre>
* <!-- outside --> 0
* <root> 1
* sometext 1
* <foobar> 2
* </foobar> 2
* </root> 1
* <!-- outside --> 0
* </pre>
*/
int getDepth();
/**
* Returns a short text describing the current parser state, including
* the position, a
* description of the current event and the data source if known.
* This method is especially useful to provide meaningful
* error messages and for debugging purposes.
*/
String getPositionDescription();
/**
* Returns the current line number, starting from 1.
* When the parser does not know the current line number
* or can not determine it, -1 is returned (e.g. for WBXML).
*
* @return current line number or -1 if unknown.
*/
int getLineNumber();
/**
* Returns the current column number, starting from 0.
* When the parser does not know the current column number
* or can not determine it, -1 is returned (e.g. for WBXML).
*
* @return current column number or -1 if unknown.
*/
int getColumnNumber();
// --------------------------------------------------------------------------
// TEXT related methods
/**
* Checks whether the current TEXT event contains only whitespace
* characters.
* For IGNORABLE_WHITESPACE, this is always true.
* For TEXT and CDSECT, false is returned when the current event text
* contains at least one non-white space character. For any other
* event type an exception is thrown.
* <p/>
* <p><b>Please note:</b> non-validating parsers are not
* able to distinguish whitespace and ignorable whitespace,
* except from whitespace outside the root element. Ignorable
* whitespace is reported as separate event, which is exposed
* via nextToken only.
*/
boolean isWhitespace() throws XmlPullParserException;
/**
* Returns the text content of the current event as String.
* The value returned depends on current event type,
* for example for TEXT event it is element content
* (this is typical case when next() is used).
* <p/>
* See description of nextToken() for detailed description of
* possible returned values for different types of events.
* <p/>
* <p><strong>NOTE:</strong> in case of ENTITY_REF, this method returns
* the entity replacement text (or null if not available). This is
* the only case where
* getText() and getTextCharacters() return different values.
*
* @see #getEventType
* @see #next
* @see #nextToken
*/
String getText();
/**
* Returns the buffer that contains the text of the current event,
* as well as the start offset and length relevant for the current
* event. See getText(), next() and nextToken() for description of possible returned values.
* <p/>
* <p><strong>Please note:</strong> this buffer must not
* be modified and its content MAY change after a call to
* next() or nextToken(). This method will always return the
* same value as getText(), except for ENTITY_REF. In the case
* of ENTITY ref, getText() returns the replacement text and
* this method returns the actual input buffer containing the
* entity name.
* If getText() returns null, this method returns null as well and
* the values returned in the holder array MUST be -1 (both start
* and length).
*
* @param holderForStartAndLength Must hold an 2-element int array
* into which the start offset and length values will be written.
* @return char buffer that contains the text of the current event
* (null if the current event has no text associated).
* @see #getText
* @see #next
* @see #nextToken
*/
char[] getTextCharacters(int [] holderForStartAndLength);
// --------------------------------------------------------------------------
// START_TAG / END_TAG shared methods
/**
* Returns the namespace URI of the current element.
* The default namespace is represented
* as empty string.
* If namespaces are not enabled, an empty String ("") is always returned.
* The current event must be START_TAG or END_TAG; otherwise,
* null is returned.
*/
String getNamespace();
/**
* For START_TAG or END_TAG events, the (local) name of the current
* element is returned when namespaces are enabled. When namespace
* processing is disabled, the raw name is returned.
* For ENTITY_REF events, the entity name is returned.
* If the current event is not START_TAG, END_TAG, or ENTITY_REF,
* null is returned.
* <p><b>Please note:</b> To reconstruct the raw element name
* when namespaces are enabled and the prefix is not null,
* you will need to add the prefix and a colon to localName..
*/
String getName();
/**
* Returns the prefix of the current element.
* If the element is in the default namespace (has no prefix),
* null is returned.
* If namespaces are not enabled, or the current event
* is not START_TAG or END_TAG, null is returned.
*/
String getPrefix();
/**
* Returns true if the current event is START_TAG and the tag
* is degenerated
* (e.g. <foobar/>).
* <p><b>NOTE:</b> if the parser is not on START_TAG, an exception
* will be thrown.
*/
boolean isEmptyElementTag() throws XmlPullParserException;
// --------------------------------------------------------------------------
// START_TAG Attributes retrieval methods
/**
* Returns the number of attributes of the current start tag, or
* -1 if the current event type is not START_TAG
*
* @see #getAttributeNamespace
* @see #getAttributeName
* @see #getAttributePrefix
* @see #getAttributeValue
*/
int getAttributeCount();
/**
* Returns the namespace URI of the attribute
* with the given index (starts from 0).
* Returns an empty string ("") if namespaces are not enabled
* or the attribute has no namespace.
* Throws an IndexOutOfBoundsException if the index is out of range
* or the current event type is not START_TAG.
* <p/>
* <p><strong>NOTE:</strong> if FEATURE_REPORT_NAMESPACE_ATTRIBUTES is set
* then namespace attributes (xmlns:ns='...') must be reported
* with namespace
* <a href="http://www.w3.org/2000/xmlns/">http://www.w3.org/2000/xmlns/</a>
* (visit this URL for description!).
* The default namespace attribute (xmlns="...") will be reported with empty namespace.
* <p><strong>NOTE:</strong>The xml prefix is bound as defined in
* <a href="http://www.w3.org/TR/REC-xml-names/#ns-using">Namespaces in XML</a>
* specification to "http://www.w3.org/XML/1998/namespace".
*
* @param zero based index of attribute
* @return attribute namespace,
* empty string ("") is returned if namesapces processing is not enabled or
* namespaces processing is enabled but attribute has no namespace (it has no prefix).
*/
String getAttributeNamespace(int index);
/**
* Returns the local name of the specified attribute
* if namespaces are enabled or just attribute name if namespaces are disabled.
* Throws an IndexOutOfBoundsException if the index is out of range
* or current event type is not START_TAG.
*
* @param zero based index of attribute
* @return attribute name (null is never returned)
*/
String getAttributeName(int index);
/**
* Returns the prefix of the specified attribute
* Returns null if the element has no prefix.
* If namespaces are disabled it will always return null.
* Throws an IndexOutOfBoundsException if the index is out of range
* or current event type is not START_TAG.
*
* @param zero based index of attribute
* @return attribute prefix or null if namespaces processing is not enabled.
*/
String getAttributePrefix(int index);
/**
* Returns the type of the specified attribute
* If parser is non-validating it MUST return CDATA.
*
* @param zero based index of attribute
* @return attribute type (null is never returned)
*/
String getAttributeType(int index);
/**
* Returns if the specified attribute was not in input was declared in XML.
* If parser is non-validating it MUST always return false.
* This information is part of XML infoset:
*
* @param zero based index of attribute
* @return false if attribute was in input
*/
boolean isAttributeDefault(int index);
/**
* Returns the given attributes value.
* Throws an IndexOutOfBoundsException if the index is out of range
* or current event type is not START_TAG.
* <p/>
* <p><strong>NOTE:</strong> attribute value must be normalized
* (including entity replacement text if PROCESS_DOCDECL is false) as described in
* <a href="http://www.w3.org/TR/REC-xml#AVNormalize">XML 1.0 section
* 3.3.3 Attribute-Value Normalization</a>
*
* @param zero based index of attribute
* @return value of attribute (null is never returned)
* @see #defineEntityReplacementText
*/
String getAttributeValue(int index);
/**
* Returns the attributes value identified by namespace URI and namespace localName.
* If namespaces are disabled namespace must be null.
* If current event type is not START_TAG then IndexOutOfBoundsException will be thrown.
* <p/>
* <p><strong>NOTE:</strong> attribute value must be normalized
* (including entity replacement text if PROCESS_DOCDECL is false) as described in
* <a href="http://www.w3.org/TR/REC-xml#AVNormalize">XML 1.0 section
* 3.3.3 Attribute-Value Normalization</a>
*
* @param namespace Namespace of the attribute if namespaces are enabled otherwise must be null
* @param name If namespaces enabled local name of attribute otherwise just attribute name
* @return value of attribute or null if attribute with given name does not exist
* @see #defineEntityReplacementText
*/
String getAttributeValue(String namespace,
String name);
// --------------------------------------------------------------------------
// actual parsing methods
/**
* Returns the type of the current event (START_TAG, END_TAG, TEXT, etc.)
*
* @see #next()
* @see #nextToken()
*/
int getEventType()
throws XmlPullParserException;
/**
* Get next parsing event - element content wil be coalesced and only one
* TEXT event must be returned for whole element content
* (comments and processing instructions will be ignored and emtity references
* must be expanded or exception mus be thrown if entity reerence can not be exapnded).
* If element content is empty (content is "") then no TEXT event will be reported.
* <p/>
* <p><b>NOTE:</b> empty element (such as <tag/>) will be reported
* with two separate events: START_TAG, END_TAG - it must be so to preserve
* parsing equivalency of empty element to <tag></tag>.
* (see isEmptyElementTag ())
*
* @see #isEmptyElementTag
* @see #START_TAG
* @see #TEXT
* @see #END_TAG
* @see #END_DOCUMENT
*/
int next()
throws XmlPullParserException, IOException;
/**
* This method works similarly to next() but will expose
* additional event types (COMMENT, CDSECT, DOCDECL, ENTITY_REF, PROCESSING_INSTRUCTION, or
* IGNORABLE_WHITESPACE) if they are available in input.
* <p/>
* <p>If special feature
* <a href="http://xmlpull.org/v1/doc/features.html#xml-roundtrip">FEATURE_XML_ROUNDTRIP</a>
* (identified by URI: http://xmlpull.org/v1/doc/features.html#xml-roundtrip)
* is enabled it is possible to do XML document round trip ie. reproduce
* exectly on output the XML input using getText():
* returned content is always unnormalized (exactly as in input).
* Otherwise returned content is end-of-line normalized as described
* <a href="http://www.w3.org/TR/REC-xml#sec-line-ends">XML 1.0 End-of-Line Handling</a>
* and. Also when this feature is enabled exact content of START_TAG, END_TAG,
* DOCDECL and PROCESSING_INSTRUCTION is available.
* <p/>
* <p>Here is the list of tokens that can be returned from nextToken()
* and what getText() and getTextCharacters() returns:<dl>
* <dt>START_DOCUMENT<dd>null
* <dt>END_DOCUMENT<dd>null
* <dt>START_TAG<dd>null unless FEATURE_XML_ROUNDTRIP
* enabled and then returns XML tag, ex: <tag attr='val'>
* <dt>END_TAG<dd>null unless FEATURE_XML_ROUNDTRIP
* id enabled and then returns XML tag, ex: </tag>
* <dt>TEXT<dd>return element content.
* <br>Note: that element content may be delivered in multiple consecutive TEXT events.
* <dt>IGNORABLE_WHITESPACE<dd>return characters that are determined to be ignorable white
* space. If the FEATURE_XML_ROUNDTRIP is enabled all whitespace content outside root
* element will always reported as IGNORABLE_WHITESPACE otherise rteporting is optional.
* <br>Note: that element content may be delevered in multiple consecutive IGNORABLE_WHITESPACE events.
* <dt>CDSECT<dd>
* return text <em>inside</em> CDATA
* (ex. 'fo<o' from <!CDATA[fo<o]]>)
* <dt>PROCESSING_INSTRUCTION<dd>
* if FEATURE_XML_ROUNDTRIP is true
* return exact PI content ex: 'pi foo' from <?pi foo?>
* otherwise it may be exact PI content or concatenation of PI target,
* space and data so for example for
* <?target data?> string "target data" may
* be returned if FEATURE_XML_ROUNDTRIP is false.
* <dt>COMMENT<dd>return comment content ex. 'foo bar' from <!--foo bar-->
* <dt>ENTITY_REF<dd>getText() MUST return entity replacement text if PROCESS_DOCDECL is false
* otherwise getText() MAY return null,
* additionally getTextCharacters() MUST return entity name
* (for example 'entity_name' for &entity_name;).
* <br><b>NOTE:</b> this is the only place where value returned from getText() and
* getTextCharacters() <b>are different</b>
* <br><b>NOTE:</b> it is user responsibility to resolve entity reference
* if PROCESS_DOCDECL is false and there is no entity replacement text set in
* defineEntityReplacementText() method (getText() will be null)
* <br><b>NOTE:</b> character entities (ex. &#32;) and standard entities such as
* &amp; &lt; &gt; &quot; &apos; are reported as well
* and are <b>not</b> reported as TEXT tokens but as ENTITY_REF tokens!
* This requirement is added to allow to do roundtrip of XML documents!
* <dt>DOCDECL<dd>
* if FEATURE_XML_ROUNDTRIP is true or PROCESS_DOCDECL is false
* then return what is inside of DOCDECL for example it returns:<pre>
* " titlepage SYSTEM "http://www.foo.bar/dtds/typo.dtd"
* [<!ENTITY % active.links "INCLUDE">]"</pre>
* <p>for input document that contained:<pre>
* <!DOCTYPE titlepage SYSTEM "http://www.foo.bar/dtds/typo.dtd"
* [<!ENTITY % active.links "INCLUDE">]></pre>
* otherwise if FEATURE_XML_ROUNDTRIP is false and PROCESS_DOCDECL is true
* then what is returned is undefined (it may be even null)
* </dd>
* </dl>
* <p/>
* <p><strong>NOTE:</strong> there is no gurantee that there will only one TEXT or
* IGNORABLE_WHITESPACE event from nextToken() as parser may chose to deliver element content in
* multiple tokens (dividing element content into chunks)
* <p/>
* <p><strong>NOTE:</strong> whether returned text of token is end-of-line normalized
* is depending on FEATURE_XML_ROUNDTRIP.
* <p/>
* <p><strong>NOTE:</strong> XMLDecl (<?xml ...?>) is not reported but its content
* is available through optional properties (see class description above).
*
* @see #next
* @see #START_TAG
* @see #TEXT
* @see #END_TAG
* @see #END_DOCUMENT
* @see #COMMENT
* @see #DOCDECL
* @see #PROCESSING_INSTRUCTION
* @see #ENTITY_REF
* @see #IGNORABLE_WHITESPACE
*/
int nextToken()
throws XmlPullParserException, IOException;
//-----------------------------------------------------------------------------
// utility methods to mak XML parsing easier ...
/**
* Test if the current event is of the given type and if the
* namespace and name do match. null will match any namespace
* and any name. If the test is not passed, an exception is
* thrown. The exception text indicates the parser position,
* the expected event and the current event that is not meeting the
* requirement.
* <p/>
* <p>Essentially it does this
* <pre>
* if (type != getEventType()
* || (namespace != null && !namespace.equals( getNamespace () ) )
* || (name != null && !name.equals( getName() ) ) )
* throw new XmlPullParserException( "expected "+ TYPES[ type ]+getPositionDescription());
* </pre>
*/
void require(int type, String namespace, String name)
throws XmlPullParserException, IOException;
/**
* If current event is START_TAG then if next element is TEXT then element content is returned
* or if next event is END_TAG then empty string is returned, otherwise exception is thrown.
* After calling this function successfully parser will be positioned on END_TAG.
* <p/>
* <p>The motivation for this function is to allow to parse consistently both
* empty elements and elements that has non empty content, for example for input: <ol>
* <li><tag>foo</tag>
* <li><tag></tag> (which is equivalent to <tag/>
* both input can be parsed with the same code:
* <pre>
* p.nextTag()
* p.requireEvent(p.START_TAG, "", "tag");
* String content = p.nextText();
* p.requireEvent(p.END_TAG, "", "tag");
* </pre>
* This function together with nextTag make it very easy to parse XML that has
* no mixed content.
* <p/>
* <p/>
* <p>Essentially it does this
* <pre>
* if(getEventType() != START_TAG) {
* throw new XmlPullParserException(
* "parser must be on START_TAG to read next text", this, null);
* }
* int eventType = next();
* if(eventType == TEXT) {
* String result = getText();
* eventType = next();
* if(eventType != END_TAG) {
* throw new XmlPullParserException(
* "event TEXT it must be immediately followed by END_TAG", this, null);
* }
* return result;
* } else if(eventType == END_TAG) {
* return "";
* } else {
* throw new XmlPullParserException(
* "parser must be on START_TAG or TEXT to read text", this, null);
* }
* </pre>
*/
String nextText() throws XmlPullParserException, IOException;
/**
* Call next() and return event if it is START_TAG or END_TAG
* otherwise throw an exception.
* It will skip whitespace TEXT before actual tag if any.
* <p/>
* <p>essentially it does this
* <pre>
* int eventType = next();
* if(eventType == TEXT && isWhitespace()) { // skip whitespace
* eventType = next();
* }
* if (eventType != START_TAG && eventType != END_TAG) {
* throw new XmlPullParserException("expected start or end tag", this, null);
* }
* return eventType;
* </pre>
*/
int nextTag() throws XmlPullParserException, IOException;
}
|