GridBagConstraints.java :  » 6.0-JDK-Core » AWT » java » awt » Java Open Source

Java Open Source » 6.0 JDK Core » AWT 
AWT » java » awt » GridBagConstraints.java
/*
 * Copyright 1995-2006 Sun Microsystems, Inc.  All Rights Reserved.
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 *
 * This code is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 only, as
 * published by the Free Software Foundation.  Sun designates this
 * particular file as subject to the "Classpath" exception as provided
 * by Sun in the LICENSE file that accompanied this code.
 *
 * This code is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * version 2 for more details (a copy is included in the LICENSE file that
 * accompanied this code).
 *
 * You should have received a copy of the GNU General Public License version
 * 2 along with this work; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
 * CA 95054 USA or visit www.sun.com if you need additional information or
 * have any questions.
 */
package java.awt;

/**
 * The <code>GridBagConstraints</code> class specifies constraints 
 * for components that are laid out using the 
 * <code>GridBagLayout</code> class.
 *
 * @version     1.47, 05/05/07
 * @author Doug Stein
 * @author Bill Spitzak (orignial NeWS & OLIT implementation)
 * @see java.awt.GridBagLayout
 * @since JDK1.0
 */
public class GridBagConstraints implements Cloneable, java.io.Serializable {

    /**
     * Specifies that this component is the next-to-last component in its 
     * column or row (<code>gridwidth</code>, <code>gridheight</code>), 
     * or that this component be placed next to the previously added 
     * component (<code>gridx</code>, <code>gridy</code>). 
     * @see      java.awt.GridBagConstraints#gridwidth
     * @see      java.awt.GridBagConstraints#gridheight
     * @see      java.awt.GridBagConstraints#gridx
     * @see      java.awt.GridBagConstraints#gridy
     */
    public static final int RELATIVE = -1;

    /**
     * Specifies that this component is the 
     * last component in its column or row. 
     */
    public static final int REMAINDER = 0;

    /**
     * Do not resize the component. 
     */
    public static final int NONE = 0;

    /**
     * Resize the component both horizontally and vertically. 
     */
    public static final int BOTH = 1;

    /**
     * Resize the component horizontally but not vertically. 
     */
    public static final int HORIZONTAL = 2;

    /**
     * Resize the component vertically but not horizontally. 
     */
    public static final int VERTICAL = 3;

    /**
     * Put the component in the center of its display area.
     */
    public static final int CENTER = 10;

    /**
     * Put the component at the top of its display area,
     * centered horizontally. 
     */
    public static final int NORTH = 11;

    /**
     * Put the component at the top-right corner of its display area. 
     */
    public static final int NORTHEAST = 12;

    /**
     * Put the component on the right side of its display area, 
     * centered vertically.
     */
    public static final int EAST = 13;

    /**
     * Put the component at the bottom-right corner of its display area. 
     */
    public static final int SOUTHEAST = 14;

    /**
     * Put the component at the bottom of its display area, centered 
     * horizontally. 
     */
    public static final int SOUTH = 15;

    /**
     * Put the component at the bottom-left corner of its display area. 
     */
    public static final int SOUTHWEST = 16;

    /**
     * Put the component on the left side of its display area, 
     * centered vertically.
     */
    public static final int WEST = 17;

    /**
     * Put the component at the top-left corner of its display area. 
     */
    public static final int NORTHWEST = 18;

    /** 
     * Place the component centered along the edge of its display area
     * associated with the start of a page for the current
     * <code>ComponentOrienation</code>.  Equal to NORTH for horizontal
     * orientations. 
     */
    public static final int PAGE_START = 19;

    /**
     * Place the component centered along the edge of its display area  
     * associated with the end of a page for the current
     * <code>ComponentOrienation</code>.  Equal to SOUTH for horizontal
     * orientations.
     */
    public static final int PAGE_END = 20;

    /**
     * Place the component centered along the edge of its display area where 
     * lines of text would normally begin for the current 
     * <code>ComponentOrienation</code>.  Equal to WEST for horizontal,
     * left-to-right orientations and EAST for horizontal, right-to-left 
     * orientations.
     */
    public static final int LINE_START = 21;

    /**
     * Place the component centered along the edge of its display area where 
     * lines of text would normally end for the current 
     * <code>ComponentOrienation</code>.  Equal to EAST for horizontal,
     * left-to-right orientations and WEST for horizontal, right-to-left 
     * orientations.
     */
    public static final int LINE_END = 22;

    /**
     * Place the component in the corner of its display area where 
     * the first line of text on a page would normally begin for the current 
     * <code>ComponentOrienation</code>.  Equal to NORTHWEST for horizontal,
     * left-to-right orientations and NORTHEAST for horizontal, right-to-left 
     * orientations.
     */
    public static final int FIRST_LINE_START = 23;

    /**
     * Place the component in the corner of its display area where 
     * the first line of text on a page would normally end for the current 
     * <code>ComponentOrienation</code>.  Equal to NORTHEAST for horizontal,
     * left-to-right orientations and NORTHWEST for horizontal, right-to-left 
     * orientations.
     */
    public static final int FIRST_LINE_END = 24;

    /**
     * Place the component in the corner of its display area where 
     * the last line of text on a page would normally start for the current 
     * <code>ComponentOrienation</code>.  Equal to SOUTHWEST for horizontal,
     * left-to-right orientations and SOUTHEAST for horizontal, right-to-left 
     * orientations.
     */
    public static final int LAST_LINE_START = 25;

    /**
     * Place the component in the corner of its display area where 
     * the last line of text on a page would normally end for the current 
     * <code>ComponentOrienation</code>.  Equal to SOUTHEAST for horizontal,
     * left-to-right orientations and SOUTHWEST for horizontal, right-to-left 
     * orientations.
     */
    public static final int LAST_LINE_END = 26;

    /**
     * Possible value for the <code>anchor</code> field.  Specifies
     * that the component should be horizontally centered and
     * vertically aligned along the baseline of the prevailing row.
     * If the component does not have a baseline it will be vertically
     * centered.
     *
     * @since 1.6
     */
    public static final int BASELINE = 0x100;

    /**
     * Possible value for the <code>anchor</code> field.  Specifies
     * that the component should be horizontally placed along the
     * leading edge.  For components with a left-to-right orientation,
     * the leading edge is the left edge.  Vertically the component is
     * aligned along the baseline of the prevailing row.  If the
     * component does not have a baseline it will be vertically
     * centered.
     *
     * @since 1.6
     */
    public static final int BASELINE_LEADING = 0x200;

    /**
     * Possible value for the <code>anchor</code> field.  Specifies
     * that the component should be horizontally placed along the
     * trailing edge.  For components with a left-to-right
     * orientation, the trailing edge is the right edge.  Vertically
     * the component is aligned along the baseline of the prevailing
     * row.  If the component does not have a baseline it will be
     * vertically centered.
     *
     * @since 1.6
     */
    public static final int BASELINE_TRAILING = 0x300;

    /**
     * Possible value for the <code>anchor</code> field.  Specifies
     * that the component should be horizontally centered.  Vertically
     * the component is positioned so that its bottom edge touches
     * the baseline of the starting row.  If the starting row does not
     * have a baseline it will be vertically centered.
     *
     * @since 1.6
     */
    public static final int ABOVE_BASELINE = 0x400;

    /**
     * Possible value for the <code>anchor</code> field.  Specifies
     * that the component should be horizontally placed along the
     * leading edge.  For components with a left-to-right orientation,
     * the leading edge is the left edge.  Vertically the component is
     * positioned so that its bottom edge touches the baseline of the
     * starting row.  If the starting row does not have a baseline it
     * will be vertically centered.
     *
     * @since 1.6
     */
    public static final int ABOVE_BASELINE_LEADING = 0x500;

    /**
     * Possible value for the <code>anchor</code> field.  Specifies
     * that the component should be horizontally placed along the
     * trailing edge.  For components with a left-to-right
     * orientation, the trailing edge is the right edge.  Vertically
     * the component is positioned so that its bottom edge touches
     * the baseline of the starting row.  If the starting row does not
     * have a baseline it will be vertically centered.
     *
     * @since 1.6
     */
    public static final int ABOVE_BASELINE_TRAILING = 0x600;

    /**
     * Possible value for the <code>anchor</code> field.  Specifies
     * that the component should be horizontally centered.  Vertically
     * the component is positioned so that its top edge touches the
     * baseline of the starting row.  If the starting row does not
     * have a baseline it will be vertically centered.
     *
     * @since 1.6
     */
    public static final int BELOW_BASELINE = 0x700;

    /**
     * Possible value for the <code>anchor</code> field.  Specifies
     * that the component should be horizontally placed along the
     * leading edge.  For components with a left-to-right orientation,
     * the leading edge is the left edge.  Vertically the component is
     * positioned so that its top edge touches the baseline of the
     * starting row.  If the starting row does not have a baseline it
     * will be vertically centered.
     *
     * @since 1.6
     */
    public static final int BELOW_BASELINE_LEADING = 0x800;

    /**
     * Possible value for the <code>anchor</code> field.  Specifies
     * that the component should be horizontally placed along the
     * trailing edge.  For components with a left-to-right
     * orientation, the trailing edge is the right edge.  Vertically
     * the component is positioned so that its top edge touches the
     * baseline of the starting row.  If the starting row does not
     * have a baseline it will be vertically centered.
     *
     * @since 1.6
     */
    public static final int BELOW_BASELINE_TRAILING = 0x900;

    /**
     * Specifies the cell containing the leading edge of the component's 
     * display area, where the first cell in a row has <code>gridx=0</code>. 
     * The leading edge of a component's display area is its left edge for
     * a horizontal, left-to-right container and its right edge for a
     * horizontal, right-to-left container.
     * The value 
     * <code>RELATIVE</code> specifies that the component be placed 
     * immediately following the component that was added to the container 
     * just before this component was added. 
     * <p>
     * The default value is <code>RELATIVE</code>. 
     * <code>gridx</code> should be a non-negative value.
     * @serial
     * @see #clone()
     * @see java.awt.GridBagConstraints#gridy
     * @see java.awt.ComponentOrientation
     */
    public int gridx;

    /**
     * Specifies the cell at the top of the component's display area, 
     * where the topmost cell has <code>gridy=0</code>. The value 
     * <code>RELATIVE</code> specifies that the component be placed just 
     * below the component that was added to the container just before 
     * this component was added. 
     * <p>
     * The default value is <code>RELATIVE</code>.
     * <code>gridy</code> should be a non-negative value.
     * @serial
     * @see #clone() 
     * @see java.awt.GridBagConstraints#gridx
     */
    public int gridy;

    /**
     * Specifies the number of cells in a row for the component's 
     * display area. 
     * <p>
     * Use <code>REMAINDER</code> to specify that the component's
     * display area will be from <code>gridx</code> to the last
     * cell in the row.
     * Use <code>RELATIVE</code> to specify that the component's
     * display area will be from <code>gridx</code> to the next
     * to the last one in its row.
     * <p>
     * <code>gridwidth</code> should be non-negative and the default
     * value is 1.
     * @serial
     * @see #clone() 
     * @see java.awt.GridBagConstraints#gridheight
     */
    public int gridwidth;

    /**
     * Specifies the number of cells in a column for the component's 
     * display area. 
     * <p>
     * Use <code>REMAINDER</code> to specify that the component's
     * display area will be from <code>gridy</code> to the last
     * cell in the column.
     * Use <code>RELATIVE</code> to specify that the component's
     * display area will be from <code>gridy</code> to the next
     * to the last one in its column.
     * <p>
     * <code>gridheight</code> should be a non-negative value and the
     * default value is 1.
     * @serial
     * @see #clone()
     * @see java.awt.GridBagConstraints#gridwidth
     */
    public int gridheight;

    /**
     * Specifies how to distribute extra horizontal space. 
     * <p>
     * The grid bag layout manager calculates the weight of a column to 
     * be the maximum <code>weightx</code> of all the components in a 
     * column. If the resulting layout is smaller horizontally than the area 
     * it needs to fill, the extra space is distributed to each column in 
     * proportion to its weight. A column that has a weight of zero receives 
     * no extra space. 
     * <p>
     * If all the weights are zero, all the extra space appears between 
     * the grids of the cell and the left and right edges. 
     * <p>
     * The default value of this field is <code>0</code>.
     * <code>weightx</code> should be a non-negative value.
     * @serial
     * @see #clone() 
     * @see java.awt.GridBagConstraints#weighty
     */
    public double weightx;

    /**
     * Specifies how to distribute extra vertical space. 
     * <p>
     * The grid bag layout manager calculates the weight of a row to be 
     * the maximum <code>weighty</code> of all the components in a row. 
     * If the resulting layout is smaller vertically than the area it 
     * needs to fill, the extra space is distributed to each row in 
     * proportion to its weight. A row that has a weight of zero receives no 
     * extra space. 
     * <p>
     * If all the weights are zero, all the extra space appears between 
     * the grids of the cell and the top and bottom edges. 
     * <p>
     * The default value of this field is <code>0</code>. 
     * <code>weighty</code> should be a non-negative value.
     * @serial
     * @see #clone()
     * @see java.awt.GridBagConstraints#weightx
     */
    public double weighty;

    /** 
     * This field is used when the component is smaller than its
     * display area. It determines where, within the display area, to
     * place the component.
     * <p> There are three kinds of possible values: orientation
     * relative, baseline relative and absolute.  Orientation relative
     * values are interpreted relative to the container's component
     * orientation property, baseline relative values are interpreted
     * relative to the baseline and absolute values are not.  The
     * absolute values are:
     * <code>CENTER</code>, <code>NORTH</code>, <code>NORTHEAST</code>,
     * <code>EAST</code>, <code>SOUTHEAST</code>, <code>SOUTH</code>,
     * <code>SOUTHWEST</code>, <code>WEST</code>, and <code>NORTHWEST</code>.
     * The orientation relative values are: <code>PAGE_START</code>,
     * <code>PAGE_END</code>,
     * <code>LINE_START</code>, <code>LINE_END</code>, 
     * <code>FIRST_LINE_START</code>, <code>FIRST_LINE_END</code>, 
     * <code>LAST_LINE_START</code> and <code>LAST_LINE_END</code>.  The
     * baseline relvative values are:
     * <code>BASELINE</code>, <code>BASELINE_LEADING</code>,
     * <code>BASELINE_TRAILING</code>,
     * <code>ABOVE_BASELINE</code>, <code>ABOVE_BASELINE_LEADING</code>,
     * <code>ABOVE_BASELINE_TRAILING</code>,
     * <code>BELOW_BASELINE</code>, <code>BELOW_BASELINE_LEADING</code>,
     * and <code>BELOW_BASELINE_TRAILING</code>.
     * The default value is <code>CENTER</code>. 
     * @serial
     * @see #clone() 
     * @see java.awt.ComponentOrientation
     */
    public int anchor;

    /**
     * This field is used when the component's display area is larger 
     * than the component's requested size. It determines whether to 
     * resize the component, and if so, how. 
     * <p>
     * The following values are valid for <code>fill</code>: 
     * <p>
     * <ul>
     * <li>
     * <code>NONE</code>: Do not resize the component. 
     * <li>
     * <code>HORIZONTAL</code>: Make the component wide enough to fill 
     *         its display area horizontally, but do not change its height. 
     * <li>
     * <code>VERTICAL</code>: Make the component tall enough to fill its 
     *         display area vertically, but do not change its width. 
     * <li>
     * <code>BOTH</code>: Make the component fill its display area 
     *         entirely. 
     * </ul>
     * <p>
     * The default value is <code>NONE</code>. 
     * @serial
     * @see #clone()
     */
    public int fill;

    /**
     * This field specifies the external padding of the component, the 
     * minimum amount of space between the component and the edges of its 
     * display area. 
     * <p>
     * The default value is <code>new Insets(0, 0, 0, 0)</code>. 
     * @serial
     * @see #clone()
     */
    public Insets insets;

    /**
     * This field specifies the internal padding of the component, how much 
     * space to add to the minimum width of the component. The width of 
     * the component is at least its minimum width plus 
     * <code>ipadx</code> pixels. 
     * <p>
     * The default value is <code>0</code>. 
     * @serial
     * @see #clone()
     * @see java.awt.GridBagConstraints#ipady
     */
    public int ipadx;

    /**
     * This field specifies the internal padding, that is, how much 
     * space to add to the minimum height of the component. The height of 
     * the component is at least its minimum height plus 
     * <code>ipady</code> pixels. 
     * <p>
     * The default value is 0. 
     * @serial
     * @see #clone()
     * @see java.awt.GridBagConstraints#ipadx
     */
    public int ipady;

    /**
     * Temporary place holder for the x coordinate.
     * @serial
     */
    int tempX;
    /**
     * Temporary place holder for the y coordinate.
     * @serial
     */
    int tempY;
    /**
     * Temporary place holder for the Width of the component.
     * @serial
     */
    int tempWidth;
    /**
     * Temporary place holder for the Height of the component.
     * @serial
     */
    int tempHeight;
    /**
     * The minimum width of the component.  It is used to calculate
     * <code>ipady</code>, where the default will be 0.
     * @serial
     * @see #ipady
     */
    int minWidth;
    /**
     * The minimum height of the component. It is used to calculate
     * <code>ipadx</code>, where the default will be 0.
     * @serial
     * @see #ipadx
     */
    int minHeight;

    // The following fields are only used if the anchor is
    // one of BASELINE, BASELINE_LEADING or BASELINE_TRAILING.
    // ascent and descent include the insets and ipady values.
    transient int ascent;
    transient int descent;
    transient Component.BaselineResizeBehavior baselineResizeBehavior;
    // The folllowing two fields are used if the baseline type is
    // CENTER_OFFSET.
    // centerPadding is either 0 or 1 and indicates if
    // the height needs to be padded by one when calculating where the
    // baseline lands
    transient int centerPadding;
    // Where the baseline lands relative to the center of the component.
    transient int centerOffset;

    /*
     * JDK 1.1 serialVersionUID 
     */
    private static final long serialVersionUID = -1000070633030801713L;

    /**
     * Creates a <code>GridBagConstraint</code> object with 
     * all of its fields set to their default value. 
     */
    public GridBagConstraints () {
        gridx = RELATIVE;
        gridy = RELATIVE;
        gridwidth = 1;
        gridheight = 1;

        weightx = 0;
        weighty = 0;
        anchor = CENTER;
        fill = NONE;

        insets = new Insets(0, 0, 0, 0);
        ipadx = 0;
        ipady = 0;
    }

    /**
     * Creates a <code>GridBagConstraints</code> object with
     * all of its fields set to the passed-in arguments.
     * 
     * Note: Because the use of this constructor hinders readability
     * of source code, this constructor should only be used by
     * automatic source code generation tools.
     * 
     * @param gridx     The initial gridx value.
     * @param gridy     The initial gridy value.
     * @param gridwidth The initial gridwidth value.
     * @param gridheight        The initial gridheight value.
     * @param weightx   The initial weightx value.
     * @param weighty   The initial weighty value.
     * @param anchor    The initial anchor value.
     * @param fill      The initial fill value.
     * @param insets    The initial insets value.
     * @param ipadx     The initial ipadx value.
     * @param ipady     The initial ipady value.
     * 
     * @see java.awt.GridBagConstraints#gridx
     * @see java.awt.GridBagConstraints#gridy
     * @see java.awt.GridBagConstraints#gridwidth
     * @see java.awt.GridBagConstraints#gridheight
     * @see java.awt.GridBagConstraints#weightx
     * @see java.awt.GridBagConstraints#weighty
     * @see java.awt.GridBagConstraints#anchor
     * @see java.awt.GridBagConstraints#fill
     * @see java.awt.GridBagConstraints#insets
     * @see java.awt.GridBagConstraints#ipadx
     * @see java.awt.GridBagConstraints#ipady
     * 
     * @since 1.2
     */
    public GridBagConstraints(int gridx, int gridy,
                              int gridwidth, int gridheight,
                              double weightx, double weighty,
                              int anchor, int fill,
                              Insets insets, int ipadx, int ipady) {
        this.gridx = gridx;
        this.gridy = gridy;
        this.gridwidth = gridwidth;
        this.gridheight = gridheight;
        this.fill = fill;
        this.ipadx = ipadx;
        this.ipady = ipady;
        this.insets = insets;
        this.anchor  = anchor;
        this.weightx = weightx;
        this.weighty = weighty;
    }

    /**
     * Creates a copy of this grid bag constraint.
     * @return     a copy of this grid bag constraint
     */
    public Object clone () {
        try { 
            GridBagConstraints c = (GridBagConstraints)super.clone();
            c.insets = (Insets)insets.clone();
            return c;
        } catch (CloneNotSupportedException e) { 
            // this shouldn't happen, since we are Cloneable
            throw new InternalError();
        }
    }

    boolean isVerticallyResizable() {
        return (fill == BOTH || fill == VERTICAL);
    }
}
java2s.com  | Contact Us | Privacy Policy
Copyright 2009 - 12 Demo Source and Support. All rights reserved.
All other trademarks are property of their respective owners.