/** Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.apache.hadoop.mapred;
import org.apache.hadoop.conf.Configuration;
import org.apache.hadoop.fs.Path;
/**
* Class providing access to resource manager configuration.
*
* Resource manager configuration involves setting up queues, and defining
* various properties for the queues. These are typically read from a file
* called capacity-scheduler.xml that must be in the classpath of the
* application. The class provides APIs to get/set and reload the
* configuration for the queues.
*/
class CapacitySchedulerConf {
/** Default file name from which the resource manager configuration is read. */
public static final String SCHEDULER_CONF_FILE = "capacity-scheduler.xml";
private int defaultUlimitMinimum;
private boolean defaultSupportPriority;
private static final String QUEUE_CONF_PROPERTY_NAME_PREFIX =
"mapred.capacity-scheduler.queue.";
/**
* If {@link JobConf#MAPRED_TASK_MAXPMEM_PROPERTY} is set to
* {@link JobConf#DISABLED_MEMORY_LIMIT}, this configuration will be used to
* calculate job's physical memory requirements as a percentage of the job's
* virtual memory requirements set via
* {@link JobConf#setMaxVirtualMemoryForTask()}. This property thus provides
* default value of physical memory for job's that don't explicitly specify
* physical memory requirements.
* <p/>
* It defaults to {@link JobConf#DISABLED_MEMORY_LIMIT} and if not explicitly
* set to a valid value, scheduler will not consider physical memory for
* scheduling even if virtual memory based scheduling is enabled.
*
* @deprecated
*/
@Deprecated
static String DEFAULT_PERCENTAGE_OF_PMEM_IN_VMEM_PROPERTY =
"mapred.capacity-scheduler.task.default-pmem-percentage-in-vmem";
/**
* Configuration that provides an upper limit on the maximum physical memory
* that can be specified by a job. The job configuration
* {@link JobConf#MAPRED_TASK_MAXPMEM_PROPERTY} should,
* by definition, be less than this value. If not, the job will be rejected
* by the scheduler. If it is set to {@link JobConf#DISABLED_MEMORY_LIMIT},
* scheduler will not consider physical memory for scheduling even if virtual
* memory based scheduling is enabled.
*
* @deprecated
*/
@Deprecated
static final String UPPER_LIMIT_ON_TASK_PMEM_PROPERTY =
"mapred.capacity-scheduler.task.limit.maxpmem";
/**
* The constant which defines the default initialization thread
* polling interval, denoted in milliseconds.
*/
private static final int INITIALIZATION_THREAD_POLLING_INTERVAL = 5000;
/**
* The constant which defines the maximum number of worker threads to be
* spawned off for job initialization
*/
private static final int MAX_INITIALIZATION_WORKER_THREADS = 5;
private Configuration rmConf;
private int defaultMaxJobsPerUsersToInitialize;
/**
* Create a new ResourceManagerConf.
* This method reads from the default configuration file mentioned in
* {@link RM_CONF_FILE}, that must be present in the classpath of the
* application.
*/
public CapacitySchedulerConf() {
rmConf = new Configuration(false);
rmConf.addResource(SCHEDULER_CONF_FILE);
initializeDefaults();
}
/**
* Create a new ResourceManagerConf reading the specified configuration
* file.
*
* @param configFile {@link Path} to the configuration file containing
* the resource manager configuration.
*/
public CapacitySchedulerConf(Path configFile) {
rmConf = new Configuration(false);
rmConf.addResource(configFile);
initializeDefaults();
}
/*
* Method used to initialize the default values and the queue list
* which is used by the Capacity Scheduler.
*/
private void initializeDefaults() {
defaultUlimitMinimum = rmConf.getInt(
"mapred.capacity-scheduler.default-minimum-user-limit-percent", 100);
defaultSupportPriority = rmConf.getBoolean(
"mapred.capacity-scheduler.default-supports-priority", false);
defaultMaxJobsPerUsersToInitialize = rmConf.getInt(
"mapred.capacity-scheduler.default-maximum-initialized-jobs-per-user",
2);
}
/**
* Get the percentage of the cluster for the specified queue.
*
* This method defaults to configured default Capacity if
* no value is specified in the configuration for this queue.
* If the configured capacity is negative value or greater than 100 an
* {@link IllegalArgumentException} is thrown.
*
* If default capacity is not configured for a queue, then
* system allocates capacity based on what is free at the time of
* capacity scheduler start
*
*
* @param queue name of the queue
* @return percent of the cluster for the queue.
*/
public float getCapacity(String queue) {
//Check done in order to return default capacity which can be negative
//In case of both capacity and default capacity not configured.
//Last check is if the configuration is specified and is marked as
//negative we throw exception
String raw = rmConf.getRaw(toFullPropertyName(queue,
"capacity"));
if(raw == null) {
return -1;
}
float result = rmConf.getFloat(toFullPropertyName(queue,
"capacity"),
-1);
if (result < 0.0 || result > 100.0) {
throw new IllegalArgumentException("Illegal capacity for queue " + queue +
" of " + result);
}
return result;
}
/**
* Sets the capacity of the given queue.
*
* @param queue name of the queue
* @param capacity percent of the cluster for the queue.
*/
public void setCapacity(String queue,float capacity) {
rmConf.setFloat(toFullPropertyName(queue, "capacity"),capacity);
}
/**
* Get whether priority is supported for this queue.
*
* If this value is false, then job priorities will be ignored in
* scheduling decisions. This method defaults to <code>false</code> if
* the property is not configured for this queue.
* @param queue name of the queue
* @return Whether this queue supports priority or not.
*/
public boolean isPrioritySupported(String queue) {
return rmConf.getBoolean(toFullPropertyName(queue, "supports-priority"),
defaultSupportPriority);
}
/**
* Set whether priority is supported for this queue.
*
*
* @param queue name of the queue
* @param value true, if the queue must support priorities, false otherwise.
*/
public void setPrioritySupported(String queue, boolean value) {
rmConf.setBoolean(toFullPropertyName(queue, "supports-priority"), value);
}
/**
* Get the minimum limit of resources for any user submitting jobs in
* this queue, in percentage.
*
* This method defaults to default user limit configured if
* no value is specified in the configuration for this queue.
*
* Throws an {@link IllegalArgumentException} when invalid value is
* configured.
*
* @param queue name of the queue
* @return minimum limit of resources, in percentage, that will be
* available for a user.
*
*/
public int getMinimumUserLimitPercent(String queue) {
int userLimit = rmConf.getInt(toFullPropertyName(queue,
"minimum-user-limit-percent"), defaultUlimitMinimum);
if(userLimit <= 0 || userLimit > 100) {
throw new IllegalArgumentException("Invalid user limit : "
+ userLimit + " for queue : " + queue);
}
return userLimit;
}
/**
* Set the minimum limit of resources for any user submitting jobs in
* this queue, in percentage.
*
* @param queue name of the queue
* @param value minimum limit of resources for any user submitting jobs
* in this queue
*/
public void setMinimumUserLimitPercent(String queue, int value) {
rmConf.setInt(toFullPropertyName(queue, "minimum-user-limit-percent"),
value);
}
/**
* Reload configuration by clearing the information read from the
* underlying configuration file.
*/
public synchronized void reloadConfiguration() {
rmConf.reloadConfiguration();
initializeDefaults();
}
static final String toFullPropertyName(String queue,
String property) {
return QUEUE_CONF_PROPERTY_NAME_PREFIX + queue + "." + property;
}
/**
* Gets the maximum number of jobs which are allowed to initialize in the
* job queue.
*
* @param queue queue name.
* @return maximum number of jobs allowed to be initialized per user.
* @throws IllegalArgumentException if maximum number of users is negative
* or zero.
*/
public int getMaxJobsPerUserToInitialize(String queue) {
int maxJobsPerUser = rmConf.getInt(toFullPropertyName(queue,
"maximum-initialized-jobs-per-user"),
defaultMaxJobsPerUsersToInitialize);
if(maxJobsPerUser <= 0) {
throw new IllegalArgumentException(
"Invalid maximum jobs per user configuration " + maxJobsPerUser);
}
return maxJobsPerUser;
}
/**
* Sets the maximum number of jobs which are allowed to be initialized
* for a user in the queue.
*
* @param queue queue name.
* @param value maximum number of jobs allowed to be initialized per user.
*/
public void setMaxJobsPerUserToInitialize(String queue, int value) {
rmConf.setInt(toFullPropertyName(queue,
"maximum-initialized-jobs-per-user"), value);
}
/**
* Amount of time in milliseconds which poller thread and initialization
* thread would sleep before looking at the queued jobs.
*
* The default value if no corresponding configuration is present is
* 5000 Milliseconds.
*
* @return time in milliseconds.
* @throws IllegalArgumentException if time is negative or zero.
*/
public long getSleepInterval() {
long sleepInterval = rmConf.getLong(
"mapred.capacity-scheduler.init-poll-interval",
INITIALIZATION_THREAD_POLLING_INTERVAL);
if(sleepInterval <= 0) {
throw new IllegalArgumentException(
"Invalid initializater poller interval " + sleepInterval);
}
return sleepInterval;
}
/**
* Gets maximum number of threads which are spawned to initialize jobs
* in job queue in parallel. The number of threads should be always less than
* or equal to number of job queues present.
*
* If number of threads is configured to be more than job queues present,
* then number of job queues is used as number of threads used for initializing
* jobs.
*
* So a given thread can have responsibility of initializing jobs from more
* than one queue.
*
* The default value is 5
*
* @return maximum number of threads spawned to initialize jobs in job queue
* in parallel.
*/
public int getMaxWorkerThreads() {
int maxWorkerThreads = rmConf.getInt(
"mapred.capacity-scheduler.init-worker-threads",
MAX_INITIALIZATION_WORKER_THREADS);
if(maxWorkerThreads <= 0) {
throw new IllegalArgumentException(
"Invalid initializater worker thread number " + maxWorkerThreads);
}
return maxWorkerThreads;
}
/**
* Set the sleep interval which initialization poller would sleep before
* it looks at the jobs in the job queue.
*
* @param interval sleep interval
*/
public void setSleepInterval(long interval) {
rmConf.setLong(
"mapred.capacity-scheduler.init-poll-interval", interval);
}
/**
* Sets number of threads which can be spawned to initialize jobs in
* parallel.
*
* @param poolSize number of threads to be spawned to initialize jobs
* in parallel.
*/
public void setMaxWorkerThreads(int poolSize) {
rmConf.setInt(
"mapred.capacity-scheduler.init-worker-threads", poolSize);
}
}
|