Java LayoutManager2 .getLayoutAlignmentX (Container target)

Syntax

LayoutManager2.getLayoutAlignmentX(Container target) has the following syntax.

float getLayoutAlignmentX(Container target)

Example

In the following code shows how to use LayoutManager2.getLayoutAlignmentX(Container target) method.


// w  w w.  java2  s . c  o m

/*
 *
 * Copyright (c) 1998 Sun Microsystems, Inc. All Rights Reserved.
 *
 * Sun grants you ("Licensee") a non-exclusive, royalty free, license to use,
 * modify and redistribute this software in source and binary code form,
 * provided that i) this copyright notice and license appear on all copies of
 * the software; and ii) Licensee does not utilize the software in a manner
 * which is disparaging to Sun.
 *
 * This software is provided "AS IS," without a warranty of any kind. ALL
 * EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY
 * IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR
 * NON-INFRINGEMENT, ARE HEREBY EXCLUDED. SUN AND ITS LICENSORS SHALL NOT BE
 * LIABLE FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
 * OR DISTRIBUTING THE SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL SUN OR ITS
 * LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, OR FOR DIRECT,
 * INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER
 * CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF THE USE OF
 * OR INABILITY TO USE SOFTWARE, EVEN IF SUN HAS BEEN ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 *
 * This software is not designed or intended for use in on-line control of
 * aircraft, air traffic, aircraft navigation or aircraft communications; or in
 * the design, construction, operation or maintenance of any nuclear
 * facility. Licensee represents and warrants that it will not use or
 * redistribute the Software for such purposes.
 */

import java.awt.Button;
import java.awt.Component;
import java.awt.Container;
import java.awt.Dimension;
import java.awt.Insets;
import java.awt.LayoutManager;
import java.awt.LayoutManager2;
import java.awt.Rectangle;
import java.util.Hashtable;

import javax.swing.JFrame;

/**
 * The <code>GraphPaperLayout</code> class is a layout manager that lays out a
 * container's components in a rectangular grid, similar to GridLayout. Unlike
 * GridLayout, however, components can take up multiple rows and/or columns. The
 * layout manager acts as a sheet of graph paper. When a component is added to
 * the layout manager, the location and relative size of the component are
 * simply supplied by the constraints as a Rectangle.
 * <P>
 * <code><pre>
 * import java.awt.*;
 * import java.applet.Applet;
 * 
 * public class ButtonGrid extends Applet {
 *   public void init() {
 *     setLayout(new GraphPaperLayout(new Dimension(5, 5)));
 *     // Add a 1x1 Rect at (0,0)
 *     add(new Button(&quot;1&quot;), new Rectangle(0, 0, 1, 1));
 *     // Add a 2x1 Rect at (2,0)
 *     add(new Button(&quot;2&quot;), new Rectangle(2, 0, 2, 1));
 *     // Add a 1x2 Rect at (1,1)
 *     add(new Button(&quot;3&quot;), new Rectangle(1, 1, 1, 2));
 *     // Add a 2x2 Rect at (3,2)
 *     add(new Button(&quot;4&quot;), new Rectangle(3, 2, 2, 2));
 *     // Add a 1x1 Rect at (0,4)
 *     add(new Button(&quot;5&quot;), new Rectangle(0, 4, 1, 1));
 *     // Add a 1x2 Rect at (2,3)
 *     add(new Button(&quot;6&quot;), new Rectangle(2, 3, 1, 2));
 *   }
 * }
 * </pre></code>
 * 
 * @author Michael Martak
 */

class GraphPaperLayout implements LayoutManager2 {
  int hgap; // horizontal gap

  int vgap; // vertical gap

  Dimension gridSize; // grid size in logical units (n x m)

  Hashtable<Component, Rectangle> compTable; // constraints (Rectangles)

  /**
   * Creates a graph paper layout with a default of a 1 x 1 graph, with no
   * vertical or horizontal padding.
   */
  public GraphPaperLayout() {
    this(new Dimension(1, 1));
  }

  /**
   * Creates a graph paper layout with the given grid size, with no vertical or
   * horizontal padding.
   */
  public GraphPaperLayout(Dimension gridSize) {
    this(gridSize, 0, 0);
  }

  /**
   * Creates a graph paper layout with the given grid size and padding.
   * 
   * @param gridSize
   *          size of the graph paper in logical units (n x m)
   * @param hgap
   *          horizontal padding
   * @param vgap
   *          vertical padding
   */
  public GraphPaperLayout(Dimension gridSize, int hgap, int vgap) {
    if ((gridSize.width <= 0) || (gridSize.height <= 0)) {
      throw new IllegalArgumentException("dimensions must be greater than zero");
    }
    this.gridSize = new Dimension(gridSize);
    this.hgap = hgap;
    this.vgap = vgap;
    compTable = new Hashtable<Component, Rectangle>();
  }

  /**
   * @return the size of the graph paper in logical units (n x m)
   */
  public Dimension getGridSize() {
    return new Dimension(gridSize);
  }

  /**
   * Set the size of the graph paper in logical units (n x m)
   */
  public void setGridSize(Dimension d) {
    setGridSize(d.width, d.height);
  }

  /**
   * Set the size of the graph paper in logical units (n x m)
   */
  public void setGridSize(int width, int height) {
    gridSize = new Dimension(width, height);
  }

  public void setConstraints(Component comp, Rectangle constraints) {
    compTable.put(comp, new Rectangle(constraints));
  }

  /**
   * Adds the specified component with the specified name to the layout. This
   * does nothing in GraphPaperLayout, since constraints are required.
   */
  public void addLayoutComponent(String name, Component comp) {
  }

  /**
   * Removes the specified component from the layout.
   * 
   * @param comp
   *          the component to be removed
   */
  public void removeLayoutComponent(Component comp) {
    compTable.remove(comp);
  }

  /**
   * Calculates the preferred size dimensions for the specified panel given the
   * components in the specified parent container.
   * 
   * @param parent
   *          the component to be laid out
   * 
   * @see #minimumLayoutSize
   */
  public Dimension preferredLayoutSize(Container parent) {
    return getLayoutSize(parent, true);
  }

  /**
   * Calculates the minimum size dimensions for the specified panel given the
   * components in the specified parent container.
   * 
   * @param parent
   *          the component to be laid out
   * @see #preferredLayoutSize
   */
  public Dimension minimumLayoutSize(Container parent) {
    return getLayoutSize(parent, false);
  }

  /**
   * Algorithm for calculating layout size (minimum or preferred).
   * <P>
   * The width of a graph paper layout is the largest cell width (calculated in
   * <code>getLargestCellSize()</code> times the number of columns, plus the
   * horizontal padding times the number of columns plus one, plus the left and
   * right insets of the target container.
   * <P>
   * The height of a graph paper layout is the largest cell height (calculated
   * in <code>getLargestCellSize()</code> times the number of rows, plus the
   * vertical padding times the number of rows plus one, plus the top and bottom
   * insets of the target container.
   * 
   * @param parent
   *          the container in which to do the layout.
   * @param isPreferred
   *          true for calculating preferred size, false for calculating minimum
   *          size.
   * @return the dimensions to lay out the subcomponents of the specified
   *         container.
   * @see java.awt.GraphPaperLayout#getLargestCellSize
   */
  protected Dimension getLayoutSize(Container parent, boolean isPreferred) {
    Dimension largestSize = getLargestCellSize(parent, isPreferred);
    Insets insets = parent.getInsets();
    largestSize.width = (largestSize.width * gridSize.width) + (hgap * (gridSize.width + 1))
        + insets.left + insets.right;
    largestSize.height = (largestSize.height * gridSize.height) + (vgap * (gridSize.height + 1))
        + insets.top + insets.bottom;
    return largestSize;
  }

  /**
   * Algorithm for calculating the largest minimum or preferred cell size.
   * <P>
   * Largest cell size is calculated by getting the applicable size of each
   * component and keeping the maximum value, dividing the component's width by
   * the number of columns it is specified to occupy and dividing the
   * component's height by the number of rows it is specified to occupy.
   * 
   * @param parent
   *          the container in which to do the layout.
   * @param isPreferred
   *          true for calculating preferred size, false for calculating minimum
   *          size.
   * @return the largest cell size required.
   */
  protected Dimension getLargestCellSize(Container parent, boolean isPreferred) {
    int ncomponents = parent.getComponentCount();
    Dimension maxCellSize = new Dimension(0, 0);
    for (int i = 0; i < ncomponents; i++) {
      Component c = parent.getComponent(i);
      Rectangle rect = compTable.get(c);
      if (c != null && rect != null) {
        Dimension componentSize;
        if (isPreferred) {
          componentSize = c.getPreferredSize();
        } else {
          componentSize = c.getMinimumSize();
        }
        // Note: rect dimensions are already asserted to be > 0 when the
        // component is added with constraints
        maxCellSize.width = Math.max(maxCellSize.width, componentSize.width / rect.width);
        maxCellSize.height = Math.max(maxCellSize.height, componentSize.height / rect.height);
      }
    }
    return maxCellSize;
  }

  /**
   * Lays out the container in the specified container.
   * 
   * @param parent
   *          the component which needs to be laid out
   */
  public void layoutContainer(Container parent) {
    synchronized (parent.getTreeLock()) {
      Insets insets = parent.getInsets();
      int ncomponents = parent.getComponentCount();

      if (ncomponents == 0) {
        return;
      }

      // Total parent dimensions
      Dimension size = parent.getSize();
      int totalW = size.width - (insets.left + insets.right);
      int totalH = size.height - (insets.top + insets.bottom);

      // Cell dimensions, including padding
      int totalCellW = totalW / gridSize.width;
      int totalCellH = totalH / gridSize.height;

      // Cell dimensions, without padding
      int cellW = (totalW - ((gridSize.width + 1) * hgap)) / gridSize.width;
      int cellH = (totalH - ((gridSize.height + 1) * vgap)) / gridSize.height;

      for (int i = 0; i < ncomponents; i++) {
        Component c = parent.getComponent(i);
        Rectangle rect = compTable.get(c);
        if (rect != null) {
          int x = insets.left + (totalCellW * rect.x) + hgap;
          int y = insets.top + (totalCellH * rect.y) + vgap;
          int w = (cellW * rect.width) - hgap;
          int h = (cellH * rect.height) - vgap;
          c.setBounds(x, y, w, h);
        }
      }
    }
  }

  // LayoutManager2 /////////////////////////////////////////////////////////

  /**
   * Adds the specified component to the layout, using the specified constraint
   * object.
   * 
   * @param comp
   *          the component to be added
   * @param constraints
   *          where/how the component is added to the layout.
   */
  public void addLayoutComponent(Component comp, Object constraints) {
    if (constraints instanceof Rectangle) {
      Rectangle rect = (Rectangle) constraints;
      if (rect.width <= 0 || rect.height <= 0) {
        throw new IllegalArgumentException(
            "cannot add to layout: rectangle must have positive width and height");
      }
      if (rect.x < 0 || rect.y < 0) {
        throw new IllegalArgumentException("cannot add to layout: rectangle x and y must be >= 0");
      }
      setConstraints(comp, rect);
    } else if (constraints != null) {
      throw new IllegalArgumentException("cannot add to layout: constraint must be a Rectangle");
    }
  }

  /**
   * Returns the maximum size of this component.
   * 
   * @see java.awt.Component#getMinimumSize()
   * @see java.awt.Component#getPreferredSize()
   * @see LayoutManager
   */
  public Dimension maximumLayoutSize(Container target) {
    return new Dimension(Integer.MAX_VALUE, Integer.MAX_VALUE);
  }

  /**
   * Returns the alignment along the x axis. This specifies how the component
   * would like to be aligned relative to other components. The value should be
   * a number between 0 and 1 where 0 represents alignment along the origin, 1
   * is aligned the furthest away from the origin, 0.5 is centered, etc.
   */
  public float getLayoutAlignmentX(Container target) {
    return 0.5f;
  }

  /**
   * Returns the alignment along the y axis. This specifies how the component
   * would like to be aligned relative to other components. The value should be
   * a number between 0 and 1 where 0 represents alignment along the origin, 1
   * is aligned the furthest away from the origin, 0.5 is centered, etc.
   */
  public float getLayoutAlignmentY(Container target) {
    return 0.5f;
  }

  /**
   * Invalidates the layout, indicating that if the layout manager has cached
   * information it should be discarded.
   */
  public void invalidateLayout(Container target) {
    // Do nothing
  }
}

public class Main {
  public static void main(String[] a) {
    JFrame frame = new JFrame();
    frame.setLayout(new GraphPaperLayout(new Dimension(5, 5)));
    // Add a 1x1 Rect at (0,0)
    frame.add(new Button("1"), new Rectangle(0, 0, 1, 1));
    // Add a 2x1 Rect at (2,0)
    frame.add(new Button("2"), new Rectangle(2, 0, 2, 1));
    // Add a 1x2 Rect at (1,1)
    frame.add(new Button("3"), new Rectangle(1, 1, 1, 2));
    // Add a 2x2 Rect at (3,2)
    frame.add(new Button("4"), new Rectangle(3, 2, 2, 2));
    // Add a 1x1 Rect at (0,4)
    frame.add(new Button("5"), new Rectangle(0, 4, 1, 1));
    // Add a 1x2 Rect at (2,3)
    frame.add(new Button("6"), new Rectangle(2, 3, 1, 2));
    frame.pack();
    frame.setVisible(true);

  }

}




















Home »
  Java Tutorial »
    java.awt »




BasicStroke
BorderLayout
CardLayout
Color
Cursor
Desktop
DesktopManager
DisplayMode
EventQueue
FlowLayout
FocusTraversalPolicy
Font
FontMetrics
GradientPaint
Graphics
Graphics2D
GraphicsConfiguration
GraphicsDevice
GraphicsEnvironment
GridBagConstraints
GridBagLayout
GridLayout
Image
ItemSelectable
KeyboardFocusManager
LayoutManager
LayoutManager2
Point
Rectangle
Robot
Shape
SplashScreen
SystemColor
SystemTray
TexturePaint
TrayIcon
Toolkit
Transparency