Example usage for javax.media.j3d TransparencyAttributes setTransparency

Introduction

In this page you can find the example usage for javax.media.j3d TransparencyAttributes setTransparency.

Prototype

public void setTransparency(float transparency) 

Source Link

Document

Sets this appearance's transparency.

Usage

From source file:AppearanceTest.java

private Appearance createAppearance(int idx) {
    Appearance app = new Appearance();

    // Globally used colors
    Color3f black = new Color3f(0.0f, 0.0f, 0.0f);
    Color3f white = new Color3f(1.0f, 1.0f, 1.0f);

    switch (idx) {
    // Unlit solid
    case 0: {//ww  w  .  j ava 2 s.c om
        // Set up the coloring properties
        Color3f objColor = new Color3f(1.0f, 0.2f, 0.4f);
        ColoringAttributes ca = new ColoringAttributes();
        ca.setColor(objColor);
        app.setColoringAttributes(ca);
        break;
    }

    // Unlit wire frame
    case 1: {
        // Set up the coloring properties
        Color3f objColor = new Color3f(0.5f, 0.0f, 0.2f);
        ColoringAttributes ca = new ColoringAttributes();
        ca.setColor(objColor);
        app.setColoringAttributes(ca);

        // Set up the polygon attributes
        PolygonAttributes pa = new PolygonAttributes();
        pa.setPolygonMode(pa.POLYGON_LINE);
        pa.setCullFace(pa.CULL_NONE);
        app.setPolygonAttributes(pa);
        break;
    }

    // Unlit points
    case 2: {
        // Set up the coloring properties
        Color3f objColor = new Color3f(0.2f, 0.2f, 1.0f);
        ColoringAttributes ca = new ColoringAttributes();
        ca.setColor(objColor);
        app.setColoringAttributes(ca);

        // Set up the polygon attributes
        PolygonAttributes pa = new PolygonAttributes();
        pa.setPolygonMode(pa.POLYGON_POINT);
        pa.setCullFace(pa.CULL_NONE);
        app.setPolygonAttributes(pa);

        // Set up point attributes
        PointAttributes pta = new PointAttributes();
        pta.setPointSize(5.0f);
        app.setPointAttributes(pta);
        break;
    }

    // Lit solid
    case 3: {
        // Set up the material properties
        Color3f objColor = new Color3f(0.8f, 0.0f, 0.0f);
        app.setMaterial(new Material(objColor, black, objColor, white, 80.0f));
        break;
    }

    // Texture mapped, lit solid
    case 4: {
        // Set up the texture map
        TextureLoader tex = new TextureLoader(texImage, this);
        app.setTexture(tex.getTexture());

        TextureAttributes texAttr = new TextureAttributes();
        texAttr.setTextureMode(TextureAttributes.MODULATE);
        app.setTextureAttributes(texAttr);

        // Set up the material properties
        app.setMaterial(new Material(white, black, white, black, 1.0f));
        break;
    }

    // Transparent, lit solid
    case 5: {
        // Set up the transparency properties
        TransparencyAttributes ta = new TransparencyAttributes();
        ta.setTransparencyMode(ta.BLENDED);
        ta.setTransparency(0.6f);
        app.setTransparencyAttributes(ta);

        // Set up the polygon attributes
        PolygonAttributes pa = new PolygonAttributes();
        pa.setCullFace(pa.CULL_NONE);
        app.setPolygonAttributes(pa);

        // Set up the material properties
        Color3f objColor = new Color3f(0.7f, 0.8f, 1.0f);
        app.setMaterial(new Material(objColor, black, objColor, black, 1.0f));
        break;
    }

    // Lit solid, no specular
    case 6: {
        // Set up the material properties
        Color3f objColor = new Color3f(0.8f, 0.0f, 0.0f);
        app.setMaterial(new Material(objColor, black, objColor, black, 80.0f));
        break;
    }

    // Lit solid, specular only
    case 7: {
        // Set up the material properties
        Color3f objColor = new Color3f(0.8f, 0.0f, 0.0f);
        app.setMaterial(new Material(black, black, black, white, 80.0f));
        break;
    }

    // Another lit solid with a different color
    case 8: {
        // Set up the material properties
        Color3f objColor = new Color3f(0.8f, 0.8f, 0.0f);
        app.setMaterial(new Material(objColor, black, objColor, white, 80.0f));
        break;
    }

    default: {
        ColoringAttributes ca = new ColoringAttributes();
        ca.setColor(new Color3f(0.0f, 1.0f, 0.0f));
        app.setColoringAttributes(ca);
    }
    }

    return app;
}

---

From source file:TickTockPicking.java

private Appearance createAppearance(int idx) {
    Appearance app = new Appearance();

    // Globally used colors
    Color3f black = new Color3f(0.0f, 0.0f, 0.0f);
    Color3f white = new Color3f(1.0f, 1.0f, 1.0f);

    switch (idx) {
    // Unlit solid
    case 0: {//from  w w  w  .  j ava2 s.c om
        // Set up the coloring properties
        Color3f objColor = new Color3f(1.0f, 0.2f, 0.4f);
        ColoringAttributes ca = new ColoringAttributes();
        ca.setColor(objColor);
        app.setColoringAttributes(ca);
        break;
    }

    // Unlit wire frame
    case 1: {
        // Set up the coloring properties
        Color3f objColor = new Color3f(1.0f, 0.4f, 0.0f);
        ColoringAttributes ca = new ColoringAttributes();
        ca.setColor(objColor);
        app.setColoringAttributes(ca);

        // Set up the polygon attributes
        PolygonAttributes pa = new PolygonAttributes();
        pa.setPolygonMode(pa.POLYGON_LINE);
        pa.setCullFace(pa.CULL_NONE);
        app.setPolygonAttributes(pa);
        break;
    }

    // Unlit points
    case 2: {
        // Set up the coloring properties
        Color3f objColor = new Color3f(1.0f, 1.0f, 0.0f);
        ColoringAttributes ca = new ColoringAttributes();
        ca.setColor(objColor);
        app.setColoringAttributes(ca);

        // Set up the polygon attributes
        PolygonAttributes pa = new PolygonAttributes();
        pa.setPolygonMode(pa.POLYGON_POINT);
        pa.setCullFace(pa.CULL_NONE);
        app.setPolygonAttributes(pa);

        // Set up point attributes
        PointAttributes pta = new PointAttributes();
        pta.setPointSize(5.0f);
        app.setPointAttributes(pta);
        break;
    }

    // Lit solid
    case 3: {
        // Set up the material properties
        Color3f objColor = new Color3f(0.8f, 0.0f, 0.0f);
        app.setMaterial(new Material(objColor, black, objColor, white, 80.0f));
        break;
    }

    // Texture mapped, lit solid
    case 4: {
        // Set up the texture map
        TextureLoader tex = new TextureLoader(texImage, this);
        app.setTexture(tex.getTexture());

        TextureAttributes texAttr = new TextureAttributes();
        texAttr.setTextureMode(TextureAttributes.MODULATE);
        app.setTextureAttributes(texAttr);

        // Set up the material properties
        app.setMaterial(new Material(white, black, white, black, 1.0f));
        break;
    }

    // Transparent, lit solid
    case 5: {
        // Set up the transparency properties
        TransparencyAttributes ta = new TransparencyAttributes();
        ta.setTransparencyMode(ta.BLENDED);
        ta.setTransparency(0.6f);
        app.setTransparencyAttributes(ta);

        // Set up the polygon attributes
        PolygonAttributes pa = new PolygonAttributes();
        pa.setCullFace(pa.CULL_NONE);
        app.setPolygonAttributes(pa);

        // Set up the material properties
        Color3f objColor = new Color3f(0.7f, 0.8f, 1.0f);
        app.setMaterial(new Material(objColor, black, objColor, black, 1.0f));
        break;
    }

    // Lit solid, no specular
    case 6: {
        // Set up the material properties
        Color3f objColor = new Color3f(0.8f, 0.0f, 0.0f);
        app.setMaterial(new Material(objColor, black, objColor, black, 80.0f));
        break;
    }

    // Lit solid, specular only
    case 7: {
        // Set up the material properties
        Color3f objColor = new Color3f(0.8f, 0.0f, 0.0f);
        app.setMaterial(new Material(black, black, black, white, 80.0f));
        break;
    }

    // Another lit solid with a different color
    case 8: {
        // Set up the material properties
        Color3f objColor = new Color3f(0.8f, 0.8f, 0.0f);
        app.setMaterial(new Material(objColor, black, objColor, white, 80.0f));
        break;
    }

    default: {
        ColoringAttributes ca = new ColoringAttributes();
        ca.setColor(new Color3f(0.0f, 1.0f, 0.0f));
        app.setColoringAttributes(ca);
    }
    }

    return app;
}

---

From source file:ExAppearance.java

private Appearance createAppearance(int idx) {
    Appearance app = new Appearance();

    // Globally used colors
    Color3f black = new Color3f(0.0f, 0.0f, 0.0f);
    Color3f white = new Color3f(1.0f, 1.0f, 1.0f);

    switch (idx) {
    // Unlit solid
    case 0: {/*  w  w  w .  ja v a  2 s  .  c o m*/
        // Set up the coloring properties
        Color3f objColor = new Color3f(1.0f, 0.2f, 0.4f);
        ColoringAttributes ca = new ColoringAttributes();
        ca.setColor(objColor);
        app.setColoringAttributes(ca);
        break;
    }

    // Unlit wire frame
    case 1: {
        // Set up the coloring properties
        Color3f objColor = new Color3f(1.0f, 0.2f, 0.4f);
        ColoringAttributes ca = new ColoringAttributes();
        ca.setColor(objColor);
        app.setColoringAttributes(ca);

        // Set up the polygon attributes
        PolygonAttributes pa = new PolygonAttributes();
        pa.setPolygonMode(pa.POLYGON_LINE);
        pa.setCullFace(pa.CULL_NONE);
        app.setPolygonAttributes(pa);

        // Set up line attributes
        LineAttributes lta = new LineAttributes();
        lta.setLineWidth(10.0f);
        app.setLineAttributes(lta);
        break;
    }

    // Unlit points
    case 2: {
        // Set up the coloring properties
        Color3f objColor = new Color3f(1.0f, 0.2f, 0.4f);
        ColoringAttributes ca = new ColoringAttributes();
        ca.setColor(objColor);
        app.setColoringAttributes(ca);

        // Set up the polygon attributes
        PolygonAttributes pa = new PolygonAttributes();
        pa.setPolygonMode(pa.POLYGON_POINT);
        pa.setCullFace(pa.CULL_NONE);
        app.setPolygonAttributes(pa);

        // Set up point attributes
        PointAttributes pta = new PointAttributes();
        pta.setPointSize(10.0f);
        app.setPointAttributes(pta);
        break;
    }

    // Lit solid
    case 3: {
        // Set up the material properties
        Color3f objColor = new Color3f(0.8f, 0.0f, 0.0f);
        app.setMaterial(new Material(objColor, black, objColor, white, 80.0f));
        break;
    }

    // Texture mapped, lit solid
    case 4: {
        // Set up the texture map
        TextureLoader tex = new TextureLoader("apimage.jpg", this);
        app.setTexture(tex.getTexture());

        // Set up the material properties
        app.setMaterial(new Material(white, black, white, black, 1.0f));
        break;
    }

    // Transparent, lit solid
    case 5: {
        // Set up the transparency properties
        TransparencyAttributes ta = new TransparencyAttributes();
        ta.setTransparencyMode(ta.BLENDED);
        ta.setTransparency(0.6f);
        app.setTransparencyAttributes(ta);

        // Set up the polygon attributes
        PolygonAttributes pa = new PolygonAttributes();
        pa.setCullFace(pa.CULL_NONE);
        app.setPolygonAttributes(pa);

        // Set up the material properties
        Color3f objColor = new Color3f(0.7f, 0.8f, 1.0f);
        app.setMaterial(new Material(objColor, black, objColor, black, 1.0f));
        break;
    }

    // Lit solid, no specular
    case 6: {
        // Set up the material properties
        Color3f objColor = new Color3f(0.0f, 0.0f, 0.8f);
        app.setMaterial(new Material(objColor, black, objColor, black, 80.0f));
        break;
    }

    // Lit solid, specular only
    case 7: {
        // Set up the material properties
        Color3f objColor = new Color3f(0.8f, 0.0f, 0.0f);
        app.setMaterial(new Material(black, black, black, white, 80.0f));
        break;
    }

    // Another lit solid with a different color
    case 8: {
        // Set up the material properties
        Color3f objColor = new Color3f(0.8f, 0.8f, 0.0f);
        app.setMaterial(new Material(objColor, black, objColor, white, 80.0f));
        break;
    }

    default: {
        ColoringAttributes ca = new ColoringAttributes();
        ca.setColor(new Color3f(0.0f, 1.0f, 0.0f));
        app.setColoringAttributes(ca);
    }
    }

    return app;
}

---