Example usage for javax.media.j3d TriangleFanArray setCoordinate

Introduction

In this page you can find the example usage for javax.media.j3d TriangleFanArray setCoordinate.

Prototype

public void setCoordinate(int index, float coordinate[]) 

Source Link

Document

Sets the coordinate associated with the vertex at the specified index for this object.

Usage

From source file:GearTest.java

/**
 * Construct a Shaft;/*from  w  w  w. jav  a  2  s .c  o  m*/
 * 
 * @return a new shaft that with the specified radius centered about the
 *         origin an laying in the XY plane and of a specified length
 *         extending in the Z dimension
 * @param radius
 *            radius of shaft
 * @param length
 *            shaft length shaft extends from -length/2 to length/2 in the Z
 *            dimension
 * @param segmentCount
 *            number of segments for the shaft face
 * @param look
 *            the Appearance to associate with this shaft
 */
public Shaft(float radius, float length, int segmentCount, Appearance look) {
    // The direction of the ray from the shaft's center
    float xDirection, yDirection;
    float xShaft, yShaft;

    // The z coordinates for the shaft's faces (never change)
    float frontZ = -0.5f * length;
    float rearZ = 0.5f * length;

    int shaftFaceVertexCount; // #(vertices) per shaft face
    int shaftFaceTotalVertexCount; // total #(vertices) in all teeth
    int shaftFaceStripCount[] = new int[1]; // per shaft vertex count
    int shaftVertexCount; // #(vertices) for shaft
    int shaftStripCount[] = new int[1]; // #(vertices) in strip/strip

    // Front and rear facing normals for the shaft's faces
    Vector3f frontNormal = new Vector3f(0.0f, 0.0f, -1.0f);
    Vector3f rearNormal = new Vector3f(0.0f, 0.0f, 1.0f);
    // Outward facing normal
    Vector3f outNormal = new Vector3f(1.0f, 0.0f, 0.0f);

    // Temporary variables for storing coordinates and vectors
    Point3f coordinate = new Point3f(0.0f, 0.0f, 0.0f);
    Shape3D newShape;

    // The angle subtended by a single segment
    double segmentAngle = 2.0 * Math.PI / segmentCount;
    double tempAngle;

    // Allow this object to spin. etc.
    this.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE);

    /*
     * for the forward facing fan: ___3___ - | - / | \ 4/\ | /\2 / \ | / \ / \ | / \ : \ | / :
     * |--------------- *----------------| 5 0 1
     * 
     * for backward facing fan exchange 1 with 5; 2 with 4, etc.
     */

    // Construct the shaft's front and rear face
    shaftFaceVertexCount = segmentCount + 2;
    shaftFaceStripCount[0] = shaftFaceVertexCount;

    TriangleFanArray frontShaftFace = new TriangleFanArray(shaftFaceVertexCount,
            GeometryArray.COORDINATES | GeometryArray.NORMALS, shaftFaceStripCount);

    TriangleFanArray rearShaftFace = new TriangleFanArray(shaftFaceVertexCount,
            GeometryArray.COORDINATES | GeometryArray.NORMALS, shaftFaceStripCount);

    coordinate.set(0.0f, 0.0f, frontZ);
    frontShaftFace.setCoordinate(0, coordinate);
    frontShaftFace.setNormal(0, frontNormal);

    coordinate.set(0.0f, 0.0f, rearZ);
    rearShaftFace.setCoordinate(0, coordinate);
    rearShaftFace.setNormal(0, rearNormal);

    for (int index = 1; index < segmentCount + 2; index++) {

        tempAngle = segmentAngle * -(double) index;
        coordinate.set(radius * (float) Math.cos(tempAngle), radius * (float) Math.sin(tempAngle), frontZ);
        frontShaftFace.setCoordinate(index, coordinate);
        frontShaftFace.setNormal(index, frontNormal);

        tempAngle = -tempAngle;
        coordinate.set(radius * (float) Math.cos(tempAngle), radius * (float) Math.sin(tempAngle), rearZ);
        rearShaftFace.setCoordinate(index, coordinate);
        rearShaftFace.setNormal(index, rearNormal);
    }
    newShape = new Shape3D(frontShaftFace, look);
    this.addChild(newShape);
    newShape = new Shape3D(rearShaftFace, look);
    this.addChild(newShape);

    // Construct shaft's outer skin (the cylinder body)
    shaftVertexCount = 2 * segmentCount + 2;
    shaftStripCount[0] = shaftVertexCount;

    TriangleStripArray shaft = new TriangleStripArray(shaftVertexCount,
            GeometryArray.COORDINATES | GeometryArray.NORMALS, shaftStripCount);

    outNormal.set(1.0f, 0.0f, 0.0f);

    coordinate.set(radius, 0.0f, rearZ);
    shaft.setCoordinate(0, coordinate);
    shaft.setNormal(0, outNormal);

    coordinate.set(radius, 0.0f, frontZ);
    shaft.setCoordinate(1, coordinate);
    shaft.setNormal(1, outNormal);

    for (int count = 0; count < segmentCount; count++) {
        int index = 2 + count * 2;

        tempAngle = segmentAngle * (double) (count + 1);
        xDirection = (float) Math.cos(tempAngle);
        yDirection = (float) Math.sin(tempAngle);
        xShaft = radius * xDirection;
        yShaft = radius * yDirection;
        outNormal.set(xDirection, yDirection, 0.0f);

        coordinate.set(xShaft, yShaft, rearZ);
        shaft.setCoordinate(index, coordinate);
        shaft.setNormal(index, outNormal);

        coordinate.set(xShaft, yShaft, frontZ);
        shaft.setCoordinate(index + 1, coordinate);
        shaft.setNormal(index + 1, outNormal);
    }
    newShape = new Shape3D(shaft, look);
    this.addChild(newShape);
}

---