ServeurFTP.java Source code

Java tutorial

Introduction

Here is the source code for ServeurFTP.java

Source

/*
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The ASF licenses this file to You under the Apache License, Version 2.0
 * (the "License"); you may not use this file except in compliance with
 * the License.  You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

import java.io.IOException;
import java.io.PrintWriter;
import java.net.InetAddress;

import org.apache.commons.net.PrintCommandListener;
import org.apache.commons.net.ProtocolCommandListener;
import org.apache.commons.net.ftp.FTPClient;
import org.apache.commons.net.ftp.FTPReply;

/***
 * This is an example program demonstrating how to use the FTPClient class.
 * This program arranges a server to server file transfer that transfers
 * a file from host1 to host2.  Keep in mind, this program might only work
 * if host2 is the same as the host you run it on (for security reasons,
 * some ftp servers only allow PORT commands to be issued with a host
 * argument equal to the client host).
 * <p>
 * Usage: ftp <host1> <user1> <pass1> <file1> <host2> <user2> <pass2> <file2>
 * <p>
 ***/
public final class ServeurFTP {
    public ServeurFTP(String server10, String username10, String password10, String file10, String server20,
            String username20, String password20, String file20) {
        String server1, username1, password1, file1;
        String server2, username2, password2, file2;
        String[] parts;
        int port1 = 0, port2 = 0;
        FTPClient ftp1, ftp2;
        ProtocolCommandListener listener;

        server1 = server10;
        parts = server1.split(":");
        if (parts.length == 2) {
            server1 = parts[0];
            port1 = Integer.parseInt(parts[1]);
        }
        username1 = username10;
        password1 = password10;
        file1 = file10;
        server2 = server20;
        parts = server2.split(":");
        if (parts.length == 2) {
            server2 = parts[0];
            port2 = Integer.parseInt(parts[1]);
        }
        username2 = username20;
        password2 = password20;
        file2 = file20;

        listener = new PrintCommandListener(new PrintWriter(System.out), true);
        ftp1 = new FTPClient();
        ftp1.addProtocolCommandListener(listener);
        ftp2 = new FTPClient();
        ftp2.addProtocolCommandListener(listener);

        try {
            int reply;
            if (port1 > 0) {
                ftp1.connect(server1, port1);
            } else {
                ftp1.connect(server1);
            }
            System.out.println("Connected to " + server1 + ".");

            reply = ftp1.getReplyCode();

            if (!FTPReply.isPositiveCompletion(reply)) {
                ftp1.disconnect();
                System.err.println("FTP server1 refused connection.");
                System.exit(1);
            }
        } catch (IOException e) {
            if (ftp1.isConnected()) {
                try {
                    ftp1.disconnect();
                } catch (IOException f) {
                    // do nothing
                }
            }
            System.err.println("Could not connect to server1.");
            e.printStackTrace();
            System.exit(1);
        }

        try {
            int reply;
            if (port2 > 0) {
                ftp2.connect(server2, port2);
            } else {
                ftp2.connect(server2);
            }
            System.out.println("Connected to " + server2 + ".");

            reply = ftp2.getReplyCode();

            if (!FTPReply.isPositiveCompletion(reply)) {
                ftp2.disconnect();
                System.err.println("FTP server2 refused connection.");
                System.exit(1);
            }
        } catch (IOException e) {
            if (ftp2.isConnected()) {
                try {
                    ftp2.disconnect();
                } catch (IOException f) {
                    // do nothing
                }
            }
            System.err.println("Could not connect to server2.");
            e.printStackTrace();
            System.exit(1);
        }

        __main: try {
            if (!ftp1.login(username1, password1)) {
                System.err.println("Could not login to " + server1);
                break __main;
            }

            if (!ftp2.login(username2, password2)) {
                System.err.println("Could not login to " + server2);
                break __main;
            }

            // Let's just assume success for now.
            ftp2.enterRemotePassiveMode();

            ftp1.enterRemoteActiveMode(InetAddress.getByName(ftp2.getPassiveHost()), ftp2.getPassivePort());

            // Although you would think the store command should be sent to server2
            // first, in reality, ftp servers like wu-ftpd start accepting data
            // connections right after entering passive mode.  Additionally, they
            // don't even send the positive preliminary reply until after the
            // transfer is completed (in the case of passive mode transfers).
            // Therefore, calling store first would hang waiting for a preliminary
            // reply.
            if (ftp1.remoteRetrieve(file1) && ftp2.remoteStoreUnique(file2)) {
                //      if(ftp1.remoteRetrieve(file1) && ftp2.remoteStore(file2)) {
                // We have to fetch the positive completion reply.
                ftp1.completePendingCommand();
                ftp2.completePendingCommand();
            } else {
                System.err.println("Couldn't initiate transfer.  Check that filenames are valid.");
                break __main;
            }

        } catch (IOException e) {
            e.printStackTrace();
            System.exit(1);
        } finally {
            try {
                if (ftp1.isConnected()) {
                    ftp1.logout();
                    ftp1.disconnect();
                }
            } catch (IOException e) {
                // do nothing
            }

            try {
                if (ftp2.isConnected()) {
                    ftp2.logout();
                    ftp2.disconnect();
                }
            } catch (IOException e) {
                // do nothing
            }
        }
    }

    public static void main(String[] args) {
        String server1, username1, password1, file1;
        String server2, username2, password2, file2;
        String[] parts;
        int port1 = 0, port2 = 0;
        FTPClient ftp1, ftp2;
        ProtocolCommandListener listener;

        if (args.length < 8) {
            System.err.println("Usage: ftp <host1> <user1> <pass1> <file1> <host2> <user2> <pass2> <file2>");
            System.exit(1);
        }

        server1 = args[0];
        parts = server1.split(":");
        if (parts.length == 2) {
            server1 = parts[0];
            port1 = Integer.parseInt(parts[1]);
        }
        username1 = args[1];
        password1 = args[2];
        file1 = args[3];
        server2 = args[4];
        parts = server2.split(":");
        if (parts.length == 2) {
            server2 = parts[0];
            port2 = Integer.parseInt(parts[1]);
        }
        username2 = args[5];
        password2 = args[6];
        file2 = args[7];

        listener = new PrintCommandListener(new PrintWriter(System.out), true);
        ftp1 = new FTPClient();
        ftp1.addProtocolCommandListener(listener);
        ftp2 = new FTPClient();
        ftp2.addProtocolCommandListener(listener);

        try {
            int reply;
            if (port1 > 0) {
                ftp1.connect(server1, port1);
            } else {
                ftp1.connect(server1);
            }
            System.out.println("Connected to " + server1 + ".");

            reply = ftp1.getReplyCode();

            if (!FTPReply.isPositiveCompletion(reply)) {
                ftp1.disconnect();
                System.err.println("FTP server1 refused connection.");
                System.exit(1);
            }
        } catch (IOException e) {
            if (ftp1.isConnected()) {
                try {
                    ftp1.disconnect();
                } catch (IOException f) {
                    // do nothing
                }
            }
            System.err.println("Could not connect to server1.");
            e.printStackTrace();
            System.exit(1);
        }

        try {
            int reply;
            if (port2 > 0) {
                ftp2.connect(server2, port2);
            } else {
                ftp2.connect(server2);
            }
            System.out.println("Connected to " + server2 + ".");

            reply = ftp2.getReplyCode();

            if (!FTPReply.isPositiveCompletion(reply)) {
                ftp2.disconnect();
                System.err.println("FTP server2 refused connection.");
                System.exit(1);
            }
        } catch (IOException e) {
            if (ftp2.isConnected()) {
                try {
                    ftp2.disconnect();
                } catch (IOException f) {
                    // do nothing
                }
            }
            System.err.println("Could not connect to server2.");
            e.printStackTrace();
            System.exit(1);
        }

        __main: try {
            if (!ftp1.login(username1, password1)) {
                System.err.println("Could not login to " + server1);
                break __main;
            }

            if (!ftp2.login(username2, password2)) {
                System.err.println("Could not login to " + server2);
                break __main;
            }

            // Let's just assume success for now.
            ftp2.enterRemotePassiveMode();

            ftp1.enterRemoteActiveMode(InetAddress.getByName(ftp2.getPassiveHost()), ftp2.getPassivePort());

            // Although you would think the store command should be sent to server2
            // first, in reality, ftp servers like wu-ftpd start accepting data
            // connections right after entering passive mode.  Additionally, they
            // don't even send the positive preliminary reply until after the
            // transfer is completed (in the case of passive mode transfers).
            // Therefore, calling store first would hang waiting for a preliminary
            // reply.
            if (ftp1.remoteRetrieve(file1) && ftp2.remoteStoreUnique(file2)) {
                //      if(ftp1.remoteRetrieve(file1) && ftp2.remoteStore(file2)) {
                // We have to fetch the positive completion reply.
                ftp1.completePendingCommand();
                ftp2.completePendingCommand();
            } else {
                System.err.println("Couldn't initiate transfer.  Check that filenames are valid.");
                break __main;
            }

        } catch (IOException e) {
            e.printStackTrace();
            System.exit(1);
        } finally {
            try {
                if (ftp1.isConnected()) {
                    ftp1.logout();
                    ftp1.disconnect();
                }
            } catch (IOException e) {
                // do nothing
            }

            try {
                if (ftp2.isConnected()) {
                    ftp2.logout();
                    ftp2.disconnect();
                }
            } catch (IOException e) {
                // do nothing
            }
        }
    }
}