android.bluetooth.le.ScanResult.java Source code

Java tutorial

Introduction

Here is the source code for android.bluetooth.le.ScanResult.java

Source

/*
 * Copyright (C) 2014 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package android.bluetooth.le;

import android.annotation.Nullable;
import android.bluetooth.BluetoothDevice;
import android.os.Parcel;
import android.os.Parcelable;

import java.util.Objects;

/**
 * ScanResult for Bluetooth LE scan.
 */
public final class ScanResult implements Parcelable {

    /**
     * For chained advertisements, inidcates tha the data contained in this
     * scan result is complete.
     */
    public static final int DATA_COMPLETE = 0x00;

    /**
     * For chained advertisements, indicates that the controller was
     * unable to receive all chained packets and the scan result contains
     * incomplete truncated data.
     */
    public static final int DATA_TRUNCATED = 0x02;

    /**
     * Indicates that the secondary physical layer was not used.
     */
    public static final int PHY_UNUSED = 0x00;

    /**
     * Advertising Set ID is not present in the packet.
     */
    public static final int SID_NOT_PRESENT = 0xFF;

    /**
     * TX power is not present in the packet.
     */
    public static final int TX_POWER_NOT_PRESENT = 0x7F;

    /**
     * Periodic advertising interval is not present in the packet.
     */
    public static final int PERIODIC_INTERVAL_NOT_PRESENT = 0x00;

    /**
     * Mask for checking whether event type represents legacy advertisement.
     */
    private static final int ET_LEGACY_MASK = 0x10;

    /**
     * Mask for checking whether event type represents connectable advertisement.
     */
    private static final int ET_CONNECTABLE_MASK = 0x01;

    // Remote Bluetooth device.
    private BluetoothDevice mDevice;

    // Scan record, including advertising data and scan response data.
    @Nullable
    private ScanRecord mScanRecord;

    // Received signal strength.
    private int mRssi;

    // Device timestamp when the result was last seen.
    private long mTimestampNanos;

    private int mEventType;
    private int mPrimaryPhy;
    private int mSecondaryPhy;
    private int mAdvertisingSid;
    private int mTxPower;
    private int mPeriodicAdvertisingInterval;

    /**
     * Constructs a new ScanResult.
     *
     * @param device Remote Bluetooth device found.
     * @param scanRecord Scan record including both advertising data and scan response data.
     * @param rssi Received signal strength.
     * @param timestampNanos Timestamp at which the scan result was observed.
     * @deprecated use {@link #ScanResult(BluetoothDevice, int, int, int, int, int, int, int,
     * ScanRecord, long)}
     */
    @Deprecated
    public ScanResult(BluetoothDevice device, ScanRecord scanRecord, int rssi, long timestampNanos) {
        mDevice = device;
        mScanRecord = scanRecord;
        mRssi = rssi;
        mTimestampNanos = timestampNanos;
        mEventType = (DATA_COMPLETE << 5) | ET_LEGACY_MASK | ET_CONNECTABLE_MASK;
        mPrimaryPhy = BluetoothDevice.PHY_LE_1M;
        mSecondaryPhy = PHY_UNUSED;
        mAdvertisingSid = SID_NOT_PRESENT;
        mTxPower = 127;
        mPeriodicAdvertisingInterval = 0;
    }

    /**
     * Constructs a new ScanResult.
     *
     * @param device Remote Bluetooth device found.
     * @param eventType Event type.
     * @param primaryPhy Primary advertising phy.
     * @param secondaryPhy Secondary advertising phy.
     * @param advertisingSid Advertising set ID.
     * @param txPower Transmit power.
     * @param rssi Received signal strength.
     * @param periodicAdvertisingInterval Periodic advertising interval.
     * @param scanRecord Scan record including both advertising data and scan response data.
     * @param timestampNanos Timestamp at which the scan result was observed.
     */
    public ScanResult(BluetoothDevice device, int eventType, int primaryPhy, int secondaryPhy, int advertisingSid,
            int txPower, int rssi, int periodicAdvertisingInterval, ScanRecord scanRecord, long timestampNanos) {
        mDevice = device;
        mEventType = eventType;
        mPrimaryPhy = primaryPhy;
        mSecondaryPhy = secondaryPhy;
        mAdvertisingSid = advertisingSid;
        mTxPower = txPower;
        mRssi = rssi;
        mPeriodicAdvertisingInterval = periodicAdvertisingInterval;
        mScanRecord = scanRecord;
        mTimestampNanos = timestampNanos;
    }

    private ScanResult(Parcel in) {
        readFromParcel(in);
    }

    @Override
    public void writeToParcel(Parcel dest, int flags) {
        if (mDevice != null) {
            dest.writeInt(1);
            mDevice.writeToParcel(dest, flags);
        } else {
            dest.writeInt(0);
        }
        if (mScanRecord != null) {
            dest.writeInt(1);
            dest.writeByteArray(mScanRecord.getBytes());
        } else {
            dest.writeInt(0);
        }
        dest.writeInt(mRssi);
        dest.writeLong(mTimestampNanos);
        dest.writeInt(mEventType);
        dest.writeInt(mPrimaryPhy);
        dest.writeInt(mSecondaryPhy);
        dest.writeInt(mAdvertisingSid);
        dest.writeInt(mTxPower);
        dest.writeInt(mPeriodicAdvertisingInterval);
    }

    private void readFromParcel(Parcel in) {
        if (in.readInt() == 1) {
            mDevice = BluetoothDevice.CREATOR.createFromParcel(in);
        }
        if (in.readInt() == 1) {
            mScanRecord = ScanRecord.parseFromBytes(in.createByteArray());
        }
        mRssi = in.readInt();
        mTimestampNanos = in.readLong();
        mEventType = in.readInt();
        mPrimaryPhy = in.readInt();
        mSecondaryPhy = in.readInt();
        mAdvertisingSid = in.readInt();
        mTxPower = in.readInt();
        mPeriodicAdvertisingInterval = in.readInt();
    }

    @Override
    public int describeContents() {
        return 0;
    }

    /**
     * Returns the remote Bluetooth device identified by the Bluetooth device address.
     */
    public BluetoothDevice getDevice() {
        return mDevice;
    }

    /**
     * Returns the scan record, which is a combination of advertisement and scan response.
     */
    @Nullable
    public ScanRecord getScanRecord() {
        return mScanRecord;
    }

    /**
     * Returns the received signal strength in dBm. The valid range is [-127, 126].
     */
    public int getRssi() {
        return mRssi;
    }

    /**
     * Returns timestamp since boot when the scan record was observed.
     */
    public long getTimestampNanos() {
        return mTimestampNanos;
    }

    /**
     * Returns true if this object represents legacy scan result.
     * Legacy scan results do not contain advanced advertising information
     * as specified in the Bluetooth Core Specification v5.
     */
    public boolean isLegacy() {
        return (mEventType & ET_LEGACY_MASK) != 0;
    }

    /**
     * Returns true if this object represents connectable scan result.
     */
    public boolean isConnectable() {
        return (mEventType & ET_CONNECTABLE_MASK) != 0;
    }

    /**
     * Returns the data status.
     * Can be one of {@link ScanResult#DATA_COMPLETE} or
     * {@link ScanResult#DATA_TRUNCATED}.
     */
    public int getDataStatus() {
        // return bit 5 and 6
        return (mEventType >> 5) & 0x03;
    }

    /**
     * Returns the primary Physical Layer
     * on which this advertisment was received.
     * Can be one of {@link BluetoothDevice#PHY_LE_1M} or
     * {@link BluetoothDevice#PHY_LE_CODED}.
     */
    public int getPrimaryPhy() {
        return mPrimaryPhy;
    }

    /**
     * Returns the secondary Physical Layer
     * on which this advertisment was received.
     * Can be one of {@link BluetoothDevice#PHY_LE_1M},
     * {@link BluetoothDevice#PHY_LE_2M}, {@link BluetoothDevice#PHY_LE_CODED}
     * or {@link ScanResult#PHY_UNUSED} - if the advertisement
     * was not received on a secondary physical channel.
     */
    public int getSecondaryPhy() {
        return mSecondaryPhy;
    }

    /**
     * Returns the advertising set id.
     * May return {@link ScanResult#SID_NOT_PRESENT} if
     * no set id was is present.
     */
    public int getAdvertisingSid() {
        return mAdvertisingSid;
    }

    /**
     * Returns the transmit power in dBm.
     * Valid range is [-127, 126]. A value of {@link ScanResult#TX_POWER_NOT_PRESENT}
     * indicates that the TX power is not present.
     */
    public int getTxPower() {
        return mTxPower;
    }

    /**
     * Returns the periodic advertising interval in units of 1.25ms.
     * Valid range is 6 (7.5ms) to 65536 (81918.75ms). A value of
     * {@link ScanResult#PERIODIC_INTERVAL_NOT_PRESENT} means periodic
     * advertising interval is not present.
     */
    public int getPeriodicAdvertisingInterval() {
        return mPeriodicAdvertisingInterval;
    }

    @Override
    public int hashCode() {
        return Objects.hash(mDevice, mRssi, mScanRecord, mTimestampNanos, mEventType, mPrimaryPhy, mSecondaryPhy,
                mAdvertisingSid, mTxPower, mPeriodicAdvertisingInterval);
    }

    @Override
    public boolean equals(Object obj) {
        if (this == obj) {
            return true;
        }
        if (obj == null || getClass() != obj.getClass()) {
            return false;
        }
        ScanResult other = (ScanResult) obj;
        return Objects.equals(mDevice, other.mDevice) && (mRssi == other.mRssi)
                && Objects.equals(mScanRecord, other.mScanRecord) && (mTimestampNanos == other.mTimestampNanos)
                && mEventType == other.mEventType && mPrimaryPhy == other.mPrimaryPhy
                && mSecondaryPhy == other.mSecondaryPhy && mAdvertisingSid == other.mAdvertisingSid
                && mTxPower == other.mTxPower && mPeriodicAdvertisingInterval == other.mPeriodicAdvertisingInterval;
    }

    @Override
    public String toString() {
        return "ScanResult{" + "device=" + mDevice + ", scanRecord=" + Objects.toString(mScanRecord) + ", rssi="
                + mRssi + ", timestampNanos=" + mTimestampNanos + ", eventType=" + mEventType + ", primaryPhy="
                + mPrimaryPhy + ", secondaryPhy=" + mSecondaryPhy + ", advertisingSid=" + mAdvertisingSid
                + ", txPower=" + mTxPower + ", periodicAdvertisingInterval=" + mPeriodicAdvertisingInterval + '}';
    }

    public static final Parcelable.Creator<ScanResult> CREATOR = new Creator<ScanResult>() {
        @Override
        public ScanResult createFromParcel(Parcel source) {
            return new ScanResult(source);
        }

        @Override
        public ScanResult[] newArray(int size) {
            return new ScanResult[size];
        }
    };

}