Java tutorial
/* * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. * The ASF licenses this file to You under the Apache License, Version 2.0 * (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ package java.nio; /** A buffer of ints. * <p> * A int buffer can be created in either of the following ways: * </p> * <ul> * <li>{@link #allocate(int) Allocate} a new int array and create a buffer based on it;</li> * <li>{@link #wrap(int[]) Wrap} an existing int array to create a new buffer;</li> * <li>Use {@link java.nio.ByteBuffer#asIntBuffer() ByteBuffer.asIntBuffer} to create a int buffer based on a byte buffer.</li> * </ul> * * @since Android 1.0 */ public abstract class IntBuffer extends Buffer implements Comparable<IntBuffer> { /** Creates an int buffer based on a newly allocated int array. * * @param capacity the capacity of the new buffer. * @return the created int buffer. * @throws IllegalArgumentException if {@code capacity} is less than zero. * @since Android 1.0 */ public static IntBuffer allocate(int capacity) { if (capacity < 0) { throw new IllegalArgumentException(); } return BufferFactory.newIntBuffer(capacity); } /** Creates a new int buffer by wrapping the given int array. * <p> * Calling this method has the same effect as {@code wrap(array, 0, array.length)}. * </p> * * @param array the int array which the new buffer will be based on. * @return the created int buffer. * @since Android 1.0 */ public static IntBuffer wrap(int[] array) { return wrap(array, 0, array.length); } /** Creates a new int buffer by wrapping the given int array. * <p> * The new buffer's position will be {@code start}, limit will be {@code start + len}, capacity will be the length of the array. * </p> * * @param array the int array which the new buffer will be based on. * @param start the start index, must not be negative and not greater than {@code array.length} * @param len the length, must not be negative and not greater than {@code array.length - start}. * @return the created int buffer. * @exception IndexOutOfBoundsException if either {@code start} or {@code len} is invalid. * @since Android 1.0 */ public static IntBuffer wrap(int[] array, int start, int len) { if (array == null) { throw new NullPointerException(); } if (start < 0 || len < 0 || (long) len + (long) start > array.length) { throw new IndexOutOfBoundsException(); } IntBuffer buf = BufferFactory.newIntBuffer(array); buf.position = start; buf.limit = start + len; return buf; } /** Constructs a {@code IntBuffer} with given capacity. * * @param capacity the capacity of the buffer. */ IntBuffer(int capacity) { super(capacity); } /** Returns the int array which this buffer is based on, if there is one. * * @return the int array which this buffer is based on. * @exception ReadOnlyBufferException if this buffer is based on an array, but it is read-only. * @exception UnsupportedOperationException if this buffer is not based on an array. * @since Android 1.0 */ public final int[] array() { return protectedArray(); } /** Returns the offset of the int array which this buffer is based on, if there is one. * <p> * The offset is the index of the array corresponds to the zero position of the buffer. * </p> * * @return the offset of the int array which this buffer is based on. * @exception ReadOnlyBufferException if this buffer is based on an array, but it is read-only. * @exception UnsupportedOperationException if this buffer is not based on an array. * @since Android 1.0 */ public final int arrayOffset() { return protectedArrayOffset(); } /** Returns a read-only buffer that shares its content with this buffer. * <p> * The returned buffer is guaranteed to be a new instance, even this buffer is read-only itself. The new buffer's position, * limit, capacity and mark are the same as this buffer's. * </p> * <p> * The new buffer shares its content with this buffer, which means this buffer's change of content will be visible to the new * buffer. The two buffer's position, limit and mark are independent. * </p> * * @return a read-only version of this buffer. * @since Android 1.0 */ public abstract IntBuffer asReadOnlyBuffer(); /** Compacts this int buffer. * <p> * The remaining ints will be moved to the head of the buffer, starting from position zero. Then the position is set to * {@code remaining()}; the limit is set to capacity; the mark is cleared. * </p> * * @return this buffer. * @exception ReadOnlyBufferException if no changes may be made to the contents of this buffer. * @since Android 1.0 */ public abstract IntBuffer compact(); /** Compares the remaining ints of this buffer to another int buffer's remaining ints. * * @param otherBuffer another int buffer. * @return a negative value if this is less than {@code other}; 0 if this equals to {@code other}; a positive value if this is * greater than {@code other}. * @exception ClassCastException if {@code other} is not an int buffer. * @since Android 1.0 */ public int compareTo(IntBuffer otherBuffer) { int compareRemaining = (remaining() < otherBuffer.remaining()) ? remaining() : otherBuffer.remaining(); int thisPos = position; int otherPos = otherBuffer.position; // BEGIN android-changed int thisInt, otherInt; while (compareRemaining > 0) { thisInt = get(thisPos); otherInt = otherBuffer.get(otherPos); if (thisInt != otherInt) { return thisInt < otherInt ? -1 : 1; } thisPos++; otherPos++; compareRemaining--; } // END android-changed return remaining() - otherBuffer.remaining(); } /** Returns a duplicated buffer that shares its content with this buffer. * <p> * The duplicated buffer's position, limit, capacity and mark are the same as this buffer. The duplicated buffer's read-only * property and byte order are the same as this buffer's. * </p> * <p> * The new buffer shares its content with this buffer, which means either buffer's change of content will be visible to the * other. The two buffer's position, limit and mark are independent. * </p> * * @return a duplicated buffer that shares its content with this buffer. * @since Android 1.0 */ public abstract IntBuffer duplicate(); /** Checks whether this int buffer is equal to another object. * <p> * If {@code other} is not a int buffer then {@code false} is returned. Two int buffers are equal if and only if their remaining * ints are exactly the same. Position, limit, capacity and mark are not considered. * </p> * * @param other the object to compare with this int buffer. * @return {@code true} if this int buffer is equal to {@code other}, {@code false} otherwise. * @since Android 1.0 */ public boolean equals(Object other) { if (!(other instanceof IntBuffer)) { return false; } IntBuffer otherBuffer = (IntBuffer) other; if (remaining() != otherBuffer.remaining()) { return false; } int myPosition = position; int otherPosition = otherBuffer.position; boolean equalSoFar = true; while (equalSoFar && (myPosition < limit)) { equalSoFar = get(myPosition++) == otherBuffer.get(otherPosition++); } return equalSoFar; } /** Returns the int at the current position and increases the position by 1. * * @return the int at the current position. * @exception BufferUnderflowException if the position is equal or greater than limit. * @since Android 1.0 */ public abstract int get(); /** Reads ints from the current position into the specified int array and increases the position by the number of ints read. * <p> * Calling this method has the same effect as {@code get(dest, 0, dest.length)}. * </p> * * @param dest the destination int array. * @return this buffer. * @exception BufferUnderflowException if {@code dest.length} is greater than {@code remaining()}. * @since Android 1.0 */ public IntBuffer get(int[] dest) { return get(dest, 0, dest.length); } /** Reads ints from the current position into the specified int array, starting from the specified offset, and increases the * position by the number of ints read. * * @param dest the target int array. * @param off the offset of the int array, must not be negative and not greater than {@code dest.length}. * @param len the number of ints to read, must be no less than zero and not greater than {@code dest.length - off}. * @return this buffer. * @exception IndexOutOfBoundsException if either {@code off} or {@code len} is invalid. * @exception BufferUnderflowException if {@code len} is greater than {@code remaining()}. * @since Android 1.0 */ public IntBuffer get(int[] dest, int off, int len) { int length = dest.length; if (off < 0 || len < 0 || (long) len + (long) off > length) { throw new IndexOutOfBoundsException(); } if (len > remaining()) { throw new BufferUnderflowException(); } for (int i = off; i < off + len; i++) { dest[i] = get(); } return this; } /** Returns an int at the specified index; the position is not changed. * * @param index the index, must not be negative and less than limit. * @return an int at the specified index. * @exception IndexOutOfBoundsException if index is invalid. * @since Android 1.0 */ public abstract int get(int index); /** Indicates whether this buffer is based on a int array and is read/write. * * @return {@code true} if this buffer is based on a int array and provides read/write access, {@code false} otherwise. * @since Android 1.0 */ public final boolean hasArray() { return protectedHasArray(); } /** Calculates this buffer's hash code from the remaining chars. The position, limit, capacity and mark don't affect the hash * code. * * @return the hash code calculated from the remaining ints. * @since Android 1.0 */ public int hashCode() { int myPosition = position; int hash = 0; while (myPosition < limit) { hash = hash + get(myPosition++); } return hash; } /** Indicates whether this buffer is direct. A direct buffer will try its best to take advantage of native memory APIs and it * may not stay in the Java heap, so it is not affected by garbage collection. * <p> * An int buffer is direct if it is based on a byte buffer and the byte buffer is direct. * </p> * * @return {@code true} if this buffer is direct, {@code false} otherwise. * @since Android 1.0 */ public abstract boolean isDirect(); /** Returns the byte order used by this buffer when converting ints from/to bytes. * <p> * If this buffer is not based on a byte buffer, then always return the platform's native byte order. * </p> * * @return the byte order used by this buffer when converting ints from/to bytes. * @since Android 1.0 */ public abstract ByteOrder order(); /** Child class implements this method to realize {@code array()}. * * @return see {@code array()} */ protected abstract int[] protectedArray(); /** Child class implements this method to realize {@code arrayOffset()}. * * @return see {@code arrayOffset()} */ protected abstract int protectedArrayOffset(); /** Child class implements this method to realize {@code hasArray()}. * * @return see {@code hasArray()} */ protected abstract boolean protectedHasArray(); /** Writes the given int to the current position and increases the position by 1. * * @param i the int to write. * @return this buffer. * @exception BufferOverflowException if position is equal or greater than limit. * @exception ReadOnlyBufferException if no changes may be made to the contents of this buffer. * @since Android 1.0 */ public abstract IntBuffer put(int i); /** Writes ints from the given int array to the current position and increases the position by the number of ints written. * <p> * Calling this method has the same effect as {@code put(src, 0, src.length)}. * </p> * * @param src the source int array. * @return this buffer. * @exception BufferOverflowException if {@code remaining()} is less than {@code src.length}. * @exception ReadOnlyBufferException if no changes may be made to the contents of this buffer. * @since Android 1.0 */ public final IntBuffer put(int[] src) { return put(src, 0, src.length); } /** Writes ints from the given int array, starting from the specified offset, to the current position and increases the position * by the number of ints written. * * @param src the source int array. * @param off the offset of int array, must not be negative and not greater than {@code src.length}. * @param len the number of ints to write, must be no less than zero and not greater than {@code src.length - off}. * @return this buffer. * @exception BufferOverflowException if {@code remaining()} is less than {@code len}. * @exception IndexOutOfBoundsException if either {@code off} or {@code len} is invalid. * @exception ReadOnlyBufferException if no changes may be made to the contents of this buffer. * @since Android 1.0 */ public IntBuffer put(int[] src, int off, int len) { int length = src.length; if (off < 0 || len < 0 || (long) len + (long) off > length) { throw new IndexOutOfBoundsException(); } if (len > remaining()) { throw new BufferOverflowException(); } for (int i = off; i < off + len; i++) { put(src[i]); } return this; } /** Writes all the remaining ints of the {@code src} int buffer to this buffer's current position, and increases both buffers' * position by the number of ints copied. * * @param src the source int buffer. * @return this buffer. * @exception BufferOverflowException if {@code src.remaining()} is greater than this buffer's {@code remaining()}. * @exception IllegalArgumentException if {@code src} is this buffer. * @exception ReadOnlyBufferException if no changes may be made to the contents of this buffer. * @since Android 1.0 */ public IntBuffer put(IntBuffer src) { if (src == this) { throw new IllegalArgumentException(); } if (src.remaining() > remaining()) { throw new BufferOverflowException(); } int[] contents = new int[src.remaining()]; src.get(contents); put(contents); return this; } /** Write a int to the specified index of this buffer; the position is not changed. * * @param index the index, must not be negative and less than the limit. * @param i the int to write. * @return this buffer. * @exception IndexOutOfBoundsException if index is invalid. * @exception ReadOnlyBufferException if no changes may be made to the contents of this buffer. * @since Android 1.0 */ public abstract IntBuffer put(int index, int i); /** Returns a sliced buffer that shares its content with this buffer. * <p> * The sliced buffer's capacity will be this buffer's {@code remaining()}, and its zero position will correspond to this * buffer's current position. The new buffer's position will be 0, limit will be its capacity, and its mark is cleared. The new * buffer's read-only property and byte order are same as this buffer's. * </p> * <p> * The new buffer shares its content with this buffer, which means either buffer's change of content will be visible to the * other. The two buffer's position, limit and mark are independent. * </p> * * @return a sliced buffer that shares its content with this buffer. * @since Android 1.0 */ public abstract IntBuffer slice(); /** Returns a string represents of the state of this int buffer. * * @return a string represents of the state of this int buffer. * @since Android 1.0 */ public String toString() { StringBuffer buf = new StringBuffer(); buf.append(getClass().getName()); buf.append(", status: capacity="); //$NON-NLS-1$ buf.append(capacity()); buf.append(" position="); //$NON-NLS-1$ buf.append(position()); buf.append(" limit="); //$NON-NLS-1$ buf.append(limit()); return buf.toString(); } }